Re: [PATCH] arm64: dts: qcom: qcs8300-ride: Enable second USB controller on QCS8300 Ride

[Konrad Dybcio]

On 10.03.2025 11:47 AM, Manish Nagar wrote:
> Enable secondary USB controller on QCS8300 Ride platform. Since it is a
> Type-A port, the dr_mode has been set to "host". The VBUS to connected
> peripherals is provided by TPS2559QWDRCTQ1 regulator connected to the
> port. The regulator has an enable pin controlled by PMM8650. Model it as
> fixed regulator and keep it Always-On at boot, since the regulator is
> GPIO controlled regulator.
> 
> Co-developed-by: Krishna Kurapati <krishna.kurapati@xxxxxxxxxxxxxxxx>
> Signed-off-by: Krishna Kurapati <krishna.kurapati@xxxxxxxxxxxxxxxx>
> Signed-off-by: Manish Nagar <quic_mnagar@xxxxxxxxxxx>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>

Konrad