[PATCH v3 4/4] spi: spi-qpic-snand: set nandc_offset for ipq9574

[Md Sadre Alam]

The BAM block expects NAND register addresses to be computed based on
the NAND register offset from QPIC base. This value is 0x30000 for
ipq9574. Update the 'nandc_offset' value in the qcom_nandc_props
appropriately.

Signed-off-by: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
---

Change in [v3]

* Added nand_offset for proper address calculation
  for newer Socs

Change in [v2]

* This patch was not part of v2

Change in [v1]

* This patch was not part of v1

 drivers/spi/spi-qpic-snand.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/spi/spi-qpic-snand.c b/drivers/spi/spi-qpic-snand.c
index 8c413a6a5152..85a742e21cf9 100644
--- a/drivers/spi/spi-qpic-snand.c
+++ b/drivers/spi/spi-qpic-snand.c
@@ -1604,6 +1604,7 @@ static void qcom_spi_remove(struct platform_device *pdev)
 static const struct qcom_nandc_props ipq9574_snandc_props = {
 	.dev_cmd_reg_start = 0x7000,
 	.supports_bam = true,
+	.nandc_offset = 0x30000,
 };
 
 static const struct of_device_id qcom_snandc_of_match[] = {
-- 
2.34.1