Re: [PATCH 2/3] usb: chipidea: ci_hdrc_imx: disable regulator on error path in probe

[Frank Li]

On Sun, Mar 09, 2025 at 08:57:58PM +0300, Fedor Pchelkin wrote:
> Upon encountering errors during the HSIC pinctrl handling section the
> regulator should be disabled.
>
> After the above-stated changes it is possible to jump onto
> "disable_hsic_regulator" label without having added the CPU latency QoS
> request previously. This would result in cpu_latency_qos_remove_request()
> yielding a WARNING.
>
> So rearrange the error handling path to follow the reverse order of
> different probing phases.

Suggest use devm_add_action() to simple whole error handle code.

>
> Found by Linux Verification Center (linuxtesting.org).

I think this sentense have not provide valuable informaiton for reader.

Frank

>
> Fixes: 4d6141288c33 ("usb: chipidea: imx: pinctrl for HSIC is optional")
> Cc: stable@xxxxxxxxxxxxxxx
> Signed-off-by: Fedor Pchelkin <pchelkin@xxxxxxxxx>
> ---
>  drivers/usb/chipidea/ci_hdrc_imx.c | 15 ++++++++-------
>  1 file changed, 8 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
> index 619779eef333..3f11ae071c7f 100644
> --- a/drivers/usb/chipidea/ci_hdrc_imx.c
> +++ b/drivers/usb/chipidea/ci_hdrc_imx.c
> @@ -407,13 +407,13 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
>  				"pinctrl_hsic_idle lookup failed, err=%ld\n",
>  					PTR_ERR(pinctrl_hsic_idle));
>  			ret = PTR_ERR(pinctrl_hsic_idle);
> -			goto err_put;
> +			goto disable_hsic_regulator;
>  		}
>
>  		ret = pinctrl_select_state(data->pinctrl, pinctrl_hsic_idle);
>  		if (ret) {
>  			dev_err(dev, "hsic_idle select failed, err=%d\n", ret);
> -			goto err_put;
> +			goto disable_hsic_regulator;
>  		}
>
>  		data->pinctrl_hsic_active = pinctrl_lookup_state(data->pinctrl,
> @@ -423,7 +423,7 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
>  				"pinctrl_hsic_active lookup failed, err=%ld\n",
>  					PTR_ERR(data->pinctrl_hsic_active));
>  			ret = PTR_ERR(data->pinctrl_hsic_active);
> -			goto err_put;
> +			goto disable_hsic_regulator;
>  		}
>  	}
>
> @@ -432,11 +432,11 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
>
>  	ret = imx_get_clks(dev);
>  	if (ret)
> -		goto disable_hsic_regulator;
> +		goto qos_remove_request;
>
>  	ret = imx_prepare_enable_clks(dev);
>  	if (ret)
> -		goto disable_hsic_regulator;
> +		goto qos_remove_request;
>
>  	ret = clk_prepare_enable(data->clk_wakeup);
>  	if (ret)
> @@ -526,12 +526,13 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
>  	clk_disable_unprepare(data->clk_wakeup);
>  err_wakeup_clk:
>  	imx_disable_unprepare_clks(dev);
> +qos_remove_request:
> +	if (pdata.flags & CI_HDRC_PMQOS)
> +		cpu_latency_qos_remove_request(&data->pm_qos_req);
>  disable_hsic_regulator:
>  	if (data->hsic_pad_regulator)
>  		/* don't overwrite original ret (cf. EPROBE_DEFER) */
>  		regulator_disable(data->hsic_pad_regulator);
> -	if (pdata.flags & CI_HDRC_PMQOS)
> -		cpu_latency_qos_remove_request(&data->pm_qos_req);
>  	data->ci_pdev = NULL;
>  err_put:
>  	if (data->usbmisc_data)
> --
> 2.48.1
>