Re: [PATCH v3 1/2] dt-bindings: clock: sophgo: add clock controller for SG2044

[Inochi Amaoto]

On Tue, Mar 11, 2025 at 12:26:21PM -0700, Stephen Boyd wrote:
> Quoting Inochi Amaoto (2025-02-26 15:23:18)
> > diff --git a/Documentation/devicetree/bindings/clock/sophgo,sg2044-clk.yaml b/Documentation/devicetree/bindings/clock/sophgo,sg2044-clk.yaml
> > new file mode 100644
> > index 000000000000..d55c5d32e206
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/clock/sophgo,sg2044-clk.yaml
> > @@ -0,0 +1,40 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/clock/sophgo,sg2044-clk.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Sophgo SG2044 Clock Controller
> > +
> > +maintainers:
> > +  - Inochi Amaoto <inochiama@xxxxxxxxx>
> 
> No description?
> 

I am not sure the things to be described. Maybe just tell the
clock required and providing?

> > +
> > +properties:
> > +  compatible:
> > +    const: sophgo,sg2044-clk
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    maxItems: 1
> > +
> > +  '#clock-cells':
> > +    const: 1
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - clocks
> > +  - '#clock-cells'
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    clock-controller@50002000 {
> > +      compatible = "sophgo,sg2044-clk";
> > +      reg = <0x50002000 0x1000>;
> > +      #clock-cells = <1>;
> > +      clocks = <&osc>;
> 
> I think you want the syscon phandle here as another property. Doing that
> will cause the DT parsing logic to wait for the syscon to be probed
> before trying to probe this driver. It's also useful so we can see if
> the clock controller is overlapping withe whatever the syscon node is,

It sounds like a good idea. At now, it does not seem like a good idea
to hidden the device dependency detail. I will add a syscon property
like "sophgo,pll-syscon" to identify its pll needs a syscon handle.

> or if that syscon node should just have the #clock-cells property as
> part of the node instead.

This is not match the hardware I think. The pll area is on the middle
of the syscon and is hard to be separated as a subdevice of the syscon
or just add  "#clock-cells" to the syscon device. It is better to handle
them in one device/driver. So let the clock device reference it.

Regards,
Inochi