[PATCH] iio: adc: rockchip: Fix clock initialization sequence

[Simon Xue]

clock_set_rate should be executed after devm_clk_get_enabled.

Fixes: 97ad10bb2901 ("iio: adc: rockchip_saradc: Make use of devm_clk_get_enabled")
Signed-off-by: Simon Xue <xxm@xxxxxxxxxxxxxx>
---
 drivers/iio/adc/rockchip_saradc.c | 17 ++++++++---------
 1 file changed, 8 insertions(+), 9 deletions(-)

diff --git a/drivers/iio/adc/rockchip_saradc.c b/drivers/iio/adc/rockchip_saradc.c
index a29e54754c8f..ab4de67fb135 100644
--- a/drivers/iio/adc/rockchip_saradc.c
+++ b/drivers/iio/adc/rockchip_saradc.c
@@ -480,15 +480,6 @@ static int rockchip_saradc_probe(struct platform_device *pdev)
 	if (info->reset)
 		rockchip_saradc_reset_controller(info->reset);
 
-	/*
-	 * Use a default value for the converter clock.
-	 * This may become user-configurable in the future.
-	 */
-	ret = clk_set_rate(info->clk, info->data->clk_rate);
-	if (ret < 0)
-		return dev_err_probe(&pdev->dev, ret,
-				     "failed to set adc clk rate\n");
-
 	ret = regulator_enable(info->vref);
 	if (ret < 0)
 		return dev_err_probe(&pdev->dev, ret,
@@ -515,6 +506,14 @@ static int rockchip_saradc_probe(struct platform_device *pdev)
 	if (IS_ERR(info->clk))
 		return dev_err_probe(&pdev->dev, PTR_ERR(info->clk),
 				     "failed to get adc clock\n");
+	/*
+	 * Use a default value for the converter clock.
+	 * This may become user-configurable in the future.
+	 */
+	ret = clk_set_rate(info->clk, info->data->clk_rate);
+	if (ret < 0)
+		return dev_err_probe(&pdev->dev, ret,
+				     "failed to set adc clk rate\n");
 
 	platform_set_drvdata(pdev, indio_dev);
 
-- 
2.34.1