Re: [PATCH net-next 2/2] r8169: disable RTL8126 ZRX-DC timeout

From: Heiner Kallweit
Date: Fri Mar 14 2025 - 07:33:32 EST


On 14.03.2025 08:50, ChunHao Lin wrote:
> Disable it due to it dose not meet ZRX-DC specification. If it is enabled,

dose -> does

> device will exit L1 substate every 100ms. Disable it for saving more power
> in L1 substate.
>
> Signed-off-by: ChunHao Lin <hau@xxxxxxxxxxx>
> ---
> drivers/net/ethernet/realtek/r8169_main.c | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
> index 3c663fca07d3..dfc96b09b85e 100644
> --- a/drivers/net/ethernet/realtek/r8169_main.c
> +++ b/drivers/net/ethernet/realtek/r8169_main.c
> @@ -2852,6 +2852,21 @@ static u32 rtl_csi_read(struct rtl8169_private *tp, int addr)
> RTL_R32(tp, CSIDR) : ~0;
> }
>
> +static void rtl_disable_zrxdc_timeout(struct rtl8169_private *tp)
> +{
> + struct pci_dev *pdev = tp->pci_dev;
> + u8 val;
> +
> + if (pdev->cfg_size > 0x0890 &&
> + pci_read_config_byte(pdev, 0x0890, &val) == PCIBIOS_SUCCESSFUL &&
> + pci_write_config_byte(pdev, 0x0890, val & ~BIT(0)) == PCIBIOS_SUCCESSFUL)
> + return;
> +
> + netdev_notice_once(tp->dev,
> + "No native access to PCI extended config space, falling back to CSI\n");
> + rtl_csi_write(tp, 0x0890, rtl_csi_read(tp, 0x0890) & ~BIT(0));
> +}
> +

Does the datasheet have a name for this extended config space register and bit 0?
This would be better than using magic numbers.

I think we can factor out the extended config space access to a helper. The same code
we have in another place already. But this can be done as a follow-up.

> static void rtl_set_aspm_entry_latency(struct rtl8169_private *tp, u8 val)
> {
> struct pci_dev *pdev = tp->pci_dev;
> @@ -3824,6 +3839,7 @@ static void rtl_hw_start_8125d(struct rtl8169_private *tp)
>
> static void rtl_hw_start_8126a(struct rtl8169_private *tp)
> {
> + rtl_disable_zrxdc_timeout(tp);
> rtl_set_def_aspm_entry_latency(tp);
> rtl_hw_start_8125_common(tp);
> }