Re: [PATCH v2 1/1] Input: snvs_pwrkey - support power-off-time-sec
From: Ian Ray
Date: Fri Mar 14 2025 - 10:48:07 EST
On Fri, Mar 14, 2025 at 02:31:12PM +0100, Krzysztof Kozlowski wrote:
> On 14/03/2025 14:24, Ian Ray wrote:
> > On Fri, Mar 14, 2025 at 01:55:47PM +0100, Krzysztof Kozlowski wrote:
> >> On 14/03/2025 10:42, Ian Ray wrote:
> >>>
> >>> /* Get SNVS register Page */
> >>> @@ -148,6 +152,24 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev)
> >>> if (pdata->irq < 0)
> >>> return -EINVAL;
> >>>
> >>> + if (!of_property_read_u32(np, "power-off-time-sec", &val)) {
> >>
> >> And when you test your DTS against binding what do you see? I suspect
> >> new warning.
> >
> > I checked the build logs (from a clean workarea), plus run-time dmesg,
> > both with the DTS change -- and without it. There are no new warnings
> > (specifically nothing mentioning snvs-pwrkey or dts or power-off-time).
> >
> > If an invalid value (such as "42") is chosen then the probe fails with
> > -EINVAL as expected.
> >
> > Is there something else that I should have checked?
>
> I don't know what your build logs process has. I meant dtbs_check
> against the bindings.
$ dt-validate -s Documentation/devicetree/bindings/input/input.yaml \
arch/arm64/boot/dts/freescale/imx8mp-ppdv2.dtb
Generated no warnings. Which (IIUC) is as expected since there is no
change to the bindings in this (v2) series.
>
> Best regards,
> Krzysztof
Thanks,
Ian