[PATCH v3] ARM: dts: r9a06g032: add r9a06g032-rzn1d400-eb board device-tree

[Thomas Bonnefille]

From: Clément Léger <clement.leger@xxxxxxxxxxx>

The EB board (Expansion board) supports both RZ/N1D and RZ-N1S. Since this
configuration targets only the RZ/N1D, it is named r9a06g032-rzn1d400-eb.
It adds support for the 2 additional switch ports (port C and D) that are
available on that board.

Signed-off-by: Clément Léger <clement.leger@xxxxxxxxxxx>

[Thomas moved the dts to the renesas directory and declared the leds in
each phy]

Signed-off-by: Thomas Bonnefille <thomas.bonnefille@xxxxxxxxxxx>
---
This short series adds support for the RZ/N1 Expansion Board. This board
is a carrier board on which a daughter board (either RZ/N1D or RZ/N1S)
can be plugged. The device-tree that is added by this series enables the
use to the 2 external switch ports that are present on this board.
---
V3:
 - Drop bindings commit as it was applied to master
 - Move Makefile modification to arch/arm/boot/dts/renesas/Makefile
 - Declare LEDs in PHY.
 - Use the driver default LED configuration as there was no reason to
   use a different one.

V2:
 - Add "renesas,rzn1d400-db" in list of compatibles for EB board
 - Replace '_' with '-' in eth pins node name
 - Split some long lines in dts
---
 arch/arm/boot/dts/renesas/Makefile                 |   1 +
 .../arm/boot/dts/renesas/r9a06g032-rzn1d400-eb.dts | 120 +++++++++++++++++++++
 2 files changed, 121 insertions(+)

diff --git a/arch/arm/boot/dts/renesas/Makefile b/arch/arm/boot/dts/renesas/Makefile
index 833a02447ecf7a02bd2efe70fae15213ede9a6de..947c7fe0280337a3aa6e9a0257f406694892239c 100644
--- a/arch/arm/boot/dts/renesas/Makefile
+++ b/arch/arm/boot/dts/renesas/Makefile
@@ -30,4 +30,5 @@ dtb-$(CONFIG_ARCH_RENESAS) += \
 	r8a7794-alt.dtb \
 	r8a7794-silk.dtb \
 	r9a06g032-rzn1d400-db.dtb \
+	r9a06g032-rzn1d400-eb.dtb \
 	sh73a0-kzm9g.dtb
diff --git a/arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-eb.dts b/arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-eb.dts
new file mode 100644
index 0000000000000000000000000000000000000000..20478941170bade197afb5cc9b3d694bd9a30951
--- /dev/null
+++ b/arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-eb.dts
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the RZN1D-EB Board
+ *
+ * Copyright (C) 2023 Schneider-Electric
+ *
+ */
+
+#include "r9a06g032-rzn1d400-db.dts"
+
+/ {
+	model = "RZN1D-EB Board";
+	compatible = "renesas,rzn1d400-eb", "renesas,rzn1d400-db",
+		     "renesas,r9a06g032";
+};
+
+&mii_conv2 {
+	renesas,miic-input = <MIIC_SWITCH_PORTD>;
+	status = "okay";
+};
+
+&mii_conv3 {
+	renesas,miic-input = <MIIC_SWITCH_PORTC>;
+	status = "okay";
+};
+
+&pinctrl{
+	pins_eth1: pins-eth1 {
+		pinmux = <RZN1_PINMUX(12, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(13, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(14, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(15, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(16, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(17, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(18, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(19, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(20, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(21, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(22, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(23, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>;
+		drive-strength = <6>;
+		bias-disable;
+	};
+
+	pins_eth2: pins-eth2 {
+		pinmux = <RZN1_PINMUX(24, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(25, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(26, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(27, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(28, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(29, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(30, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(31, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(32, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(33, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(34, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(35, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>;
+		drive-strength = <6>;
+		bias-disable;
+	};
+};
+
+&switch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_eth1>, <&pins_eth2>, <&pins_eth3>, <&pins_eth4>,
+		    <&pins_mdio1>;
+
+	mdio {
+		/* CN15 and CN16 switches must be configured in MDIO2 mode */
+		switch0phy1: ethernet-phy@1 {
+			reg = <1>;
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+				};
+				led@1 {
+					reg = <1>;
+				};
+				led@2 {
+					reg = <2>;
+				};
+			};	
+		};
+
+		switch0phy10: ethernet-phy@10 {
+			reg = <10>;
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+				};
+				led@1 {
+					reg = <1>;
+				};
+				led@2 {
+					reg = <2>;
+				};
+			};	
+		};
+	};
+};
+
+&switch_port2 {
+	label = "lan2";
+	phy-mode = "rgmii-id";
+	phy-handle = <&switch0phy10>;
+	status = "okay";
+};
+
+&switch_port3 {
+	label = "lan3";
+	phy-mode = "rgmii-id";
+	phy-handle = <&switch0phy1>;
+	status = "okay";
+};

---
base-commit: 9c5968db9e625019a0ee5226c7eebef5519d366a
change-id: 20250127-rzn1d400-eb-3fc1479a13e6

Best regards,
-- 
Thomas Bonnefille <thomas.bonnefille@xxxxxxxxxxx>