Re: [PATCH 5/5] iio: adc: ad4030: explain rearranging raw sample data

From: Jonathan Cameron
Date: Sat Mar 15 2025 - 09:04:55 EST


On Tue, 11 Mar 2025 09:30:32 +0000
Nuno Sá <noname.nuno@xxxxxxxxx> wrote:

> On Mon, 2025-03-10 at 15:43 -0500, David Lechner wrote:
> > Add a comment explaining why the raw sample data is rearranged in the
> > in the ad4030_conversion() function. It is not so obvious from the code
> > why this is done.
> >
> > Signed-off-by: David Lechner <dlechner@xxxxxxxxxxxx>
> > ---
>
> Reviewed-by: Nuno Sá <nuno.sa@xxxxxxxxxx>
>
> (BTW, for some reason I started to send the tags without first checking the
> complete series. So I could have just replied to the cover :facepalm:

I do that sometimes when I know I might not get to the end of the series :)

Just to add to the confusion...

Series applied to the testing branch of iio.git which I'll rebase after
rc1 is available.

Thanks

Jonathan

>
> - Nuno Sá
>
> >  drivers/iio/adc/ad4030.c | 6 ++++++
> >  1 file changed, 6 insertions(+)
> >
> > diff --git a/drivers/iio/adc/ad4030.c b/drivers/iio/adc/ad4030.c
> > index
> > 54ad74b96c9f256a67848330f875379edc828b0b..636f9f33e66af73d102722b984dc1230e141
> > 7d1e 100644
> > --- a/drivers/iio/adc/ad4030.c
> > +++ b/drivers/iio/adc/ad4030.c
> > @@ -646,6 +646,12 @@ static int ad4030_conversion(struct iio_dev *indio_dev)
> >      &st->rx_data.dual.diff[0],
> >      &st->rx_data.dual.diff[1]);
> >  
> > + /*
> > + * If no common mode voltage channel is enabled, we can use the raw
> > + * data as is. Otherwise, we need to rearrange the data a bit to
> > match
> > + * the natural alignment of the IIO buffer.
> > + */
> > +
> >   if (st->mode != AD4030_OUT_DATA_MD_16_DIFF_8_COM &&
> >       st->mode != AD4030_OUT_DATA_MD_24_DIFF_8_COM)
> >   return 0;
> >
>