Re: [PATCH 3/4] arm64: dts: qcom: sa8775p: add support for video node

[Konrad Dybcio]

On 3/11/25 1:03 PM, Vikash Garodia wrote:
> Video node enables video on Qualcomm SA8775P platform.
> 
> Signed-off-by: Vikash Garodia <quic_vgarodia@xxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sa8775p.dtsi | 67 +++++++++++++++++++++++++++++++++++
>  1 file changed, 67 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> index 3394ae2d13003417a15e64c9e47833725ec779e6..09db8e2eb578f1cada0f4a15e3f844dc097bd46d 100644
> --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> @@ -10,6 +10,7 @@
>  #include <dt-bindings/clock/qcom,sa8775p-dispcc.h>
>  #include <dt-bindings/clock/qcom,sa8775p-gcc.h>
>  #include <dt-bindings/clock/qcom,sa8775p-gpucc.h>
> +#include <dt-bindings/clock/qcom,sa8775p-videocc.h>
>  #include <dt-bindings/dma/qcom-gpi.h>
>  #include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h>
>  #include <dt-bindings/mailbox/qcom-ipcc.h>
> @@ -3783,6 +3784,72 @@ llcc: system-cache-controller@9200000 {
>  			interrupts = <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>;
>  		};
>  
> +		iris: video-codec@aa00000 {
> +			compatible = "qcom,sa8775p-iris";
> +
> +			reg = <0 0x0aa00000 0 0xf0000>;
> +			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
> +
> +			power-domains = <&videocc VIDEO_CC_MVS0C_GDSC>,
> +					<&videocc VIDEO_CC_MVS0_GDSC>,
> +					<&rpmhpd SA8775P_MXC>,
> +					<&rpmhpd SA8775P_MMCX>;
> +			power-domain-names = "venus",
> +					     "vcodec0",
> +					     "mx",
> +					     "mmcx";
> +			operating-points-v2 = <&iris_opp_table>;
> +
> +			clocks = <&gcc GCC_VIDEO_AXI0_CLK>,
> +				 <&videocc VIDEO_CC_MVS0C_CLK>,
> +				 <&videocc VIDEO_CC_MVS0_CLK>;
> +			clock-names = "iface",
> +				      "core",
> +				      "vcodec0_core";
> +
> +			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> +					&config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ALWAYS>,

This path should use QCOM_ICC_TAG_ACTIVE_ONLY on both endpoints

> +					<&mmss_noc MASTER_VIDEO_P0 QCOM_ICC_TAG_ALWAYS
> +					&mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
> +			interconnect-names = "cpu-cfg",
> +					     "video-mem";
> +
> +			firmware-name = "qcom/vpu/vpu30_p4_s6.mbn";

If it needs different firmware, I have my doubts over why 8550's data
would be fully reused. Are you sure everything in iris_platform_sm8550.c
applies?

> +			memory-region = <&pil_video_mem>;
> +
> +			resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>;
> +			reset-names = "bus";
> +
> +			iommus = <&apps_smmu 0x0880 0x0400>,
> +				 <&apps_smmu 0x0887 0x0400>;
> +			dma-coherent;
> +
> +			iris_opp_table: opp-table {
> +				compatible = "operating-points-v2";
> +
> +				opp-366000000 {
> +					opp-hz = /bits/ 64 <366000000>;
> +					required-opps = <&rpmhpd_opp_svs_l1>,
> +							<&rpmhpd_opp_svs_l1>;
> +				};

Please add a newline between subsequent subnodes

Konrad