Re: [PATCH 01/11] iio: adc: ad7606_spi: check error in ad7606B_sw_mode_config()

From: Jonathan Cameron
Date: Sat Mar 15 2025 - 14:48:40 EST


On Wed, 12 Mar 2025 20:15:39 -0500
David Lechner <dlechner@xxxxxxxxxxxx> wrote:

> Add missing error check in ad7606B_sw_mode_config().
>
> Fixes: d2a415c86c6b ("iio: adc: ad7606: Add support for AD7606B ADC")

Nice to have, but is there a path in which this happens other than
in hardware failure? If not probably not worth a fixes tag (which
tends to make people start backporting things).

> Signed-off-by: David Lechner <dlechner@xxxxxxxxxxxx>
> ---
> drivers/iio/adc/ad7606_spi.c | 8 +++++---
> 1 file changed, 5 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/iio/adc/ad7606_spi.c b/drivers/iio/adc/ad7606_spi.c
> index 885bf0b68e7775c5f4a12dfb827f502d5f782e8c..c028e08efe2c82cd97249f98eec50a9a9c06471f 100644
> --- a/drivers/iio/adc/ad7606_spi.c
> +++ b/drivers/iio/adc/ad7606_spi.c
> @@ -174,11 +174,13 @@ static int ad7616_sw_mode_config(struct iio_dev *indio_dev)
> static int ad7606B_sw_mode_config(struct iio_dev *indio_dev)
> {
> struct ad7606_state *st = iio_priv(indio_dev);
> + int ret;
>
> /* Configure device spi to output on a single channel */
> - st->bops->reg_write(st,
> - AD7606_CONFIGURATION_REGISTER,
> - AD7606_SINGLE_DOUT);
> + ret = st->bops->reg_write(st, AD7606_CONFIGURATION_REGISTER,
> + AD7606_SINGLE_DOUT);
> + if (ret)
> + return ret;
>
> /*
> * Scale can be configured individually for each channel
>