[PATCH] arm64: dts: rockchip: Allow Turing RK1 cooling fan to spin down

From: Sam Edwards
Date: Sat Mar 15 2025 - 16:51:23 EST


The RK3588 thermal sensor driver only receives interrupts when a
higher-temperature threshold is crossed; it cannot notify when the
sensor cools back off. As a result, the driver must poll for temperature
changes to detect when the conditions for a thermal trip are no longer
met. However, it only does so if the DT enables polling.

Before this patch, the RK1 DT did not enable polling, causing the fan to
continue running at the speed corresponding to the highest temperature
reached.

Follow suit with similar RK3588 boards by setting a polling-delay of
1000ms, enabling the driver to detect when the sensor cools back off,
allowing the fan speed to decrease as appropriate.

Fixes: 7c8ec5e6b9d6 ("arm64: dts: rockchip: Enable automatic fan control on Turing RK1")
Signed-off-by: Sam Edwards <CFSworks@xxxxxxxxx>
---
arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi | 2 ++
1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi
index 6bc46734cc14..0270bffce195 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi
@@ -214,6 +214,8 @@ rgmii_phy: ethernet-phy@1 {
};

&package_thermal {
+ polling-delay = <1000>;
+
trips {
package_active1: trip-active1 {
temperature = <45000>;
--
2.45.3