Re: [PATCH] drm/panel/sharp-ls043t1le01: Use _multi variants

[Dmitry Baryshkov]

On Sun, Mar 16, 2025 at 02:58:22PM -0400, Anusha Srivatsa wrote:
> Move away from using deprecated API and use _multi
> variants if available. Use mipi_dsi_msleep()
> and mipi_dsi_usleep_range() instead of msleep()
> and usleep_range() respectively.
> 
> Used Coccinelle to find the _multi variant APIs,
> replacing mpi_dsi_msleep() where necessary and for returning
> dsi_ctx.accum_err in these functions.
> 
> @rule_1@
> identifier dsi_var;
> identifier r;
> identifier func;
> type t;
> position p;
> expression dsi_device;
> expression list es;
> @@
> t func(...) {
> ...
> struct mipi_dsi_device *dsi_var = dsi_device;
> +struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi_var };
> <+...
> (
> -r = mipi_dsi_dcs_nop(dsi_var)@p;
> +mipi_dsi_dcs_nop_multi(&dsi_ctx);
> |
> -r = mipi_dsi_dcs_exit_sleep_mode(dsi_var)@p;
> +mipi_dsi_dcs_exit_sleep_mode_multi(&dsi_ctx);
> |
> -r = mipi_dsi_dcs_enter_sleep_mode(dsi_var)@p;
> +mipi_dsi_dcs_enter_sleep_mode_multi(&dsi_ctx);
> |
> -r = mipi_dsi_dcs_write_buffer(dsi_var,es)@p;
> +mipi_dsi_dcs_write_buffer_multi(&dsi_ctx,es);
> |
> -r = mipi_dsi_dcs_set_display_off(dsi_var,es)@p;
> +mipi_dsi_dcs_set_display_off_multi(&dsi_ctx,es);
> |
> -r = mipi_dsi_compression_mode_ext(dsi_var,es)@p;
> +mipi_dsi_compression_mode_ext_multi(&dsi_ctx,es);
> |
> -r = mipi_dsi_compression_mode(dsi_var,es)@p;
> +mipi_dsi_compression_mode_multi(&dsi_ctx,es);
> |
> -r = mipi_dsi_picture_parameter_set(dsi_var,es)@p;
> +mipi_dsi_picture_parameter_set_multi(&dsi_ctx,es);
> |
> -r = mipi_dsi_dcs_set_display_on(dsi_var,es)@p;
> +mipi_dsi_dcs_set_display_on_multi(&dsi_ctx,es);
> |
> -r = mipi_dsi_dcs_set_tear_on(dsi_var)@p;
> +mipi_dsi_dcs_set_tear_on_multi(&dsi_ctx);
> |
> -r = mipi_dsi_turn_on_peripheral(dsi_var)@p;
> +mipi_dsi_turn_on_peripheral_multi(&dsi_ctx);
> |
> -r = mipi_dsi_dcs_soft_reset(dsi_var)@p;
> +mipi_dsi_dcs_soft_reset_multi(&dsi_ctx);
> |
> -r = mipi_dsi_dcs_set_display_brightness(dsi_var,es)@p;
> +mipi_dsi_dcs_set_display_brightness_multi(&dsi_ctx,es);
> |
> -r = mipi_dsi_dcs_set_pixel_format(dsi_var,es)@p;
> +mipi_dsi_dcs_set_pixel_format_multi(&dsi_ctx,es);
> |
> -r = mipi_dsi_dcs_set_column_address(dsi_var,es)@p;
> +mipi_dsi_dcs_set_column_address_multi(&dsi_ctx,es);
> |
> -r = mipi_dsi_dcs_set_page_address(dsi_var,es)@p;
> +mipi_dsi_dcs_set_page_address_multi(&dsi_ctx,es);
> |
> -r = mipi_dsi_dcs_set_tear_scanline(dsi_var,es)@p;
> +mipi_dsi_dcs_set_tear_scanline_multi(&dsi_ctx,es);
> )
> -if(r < 0) {
> -...
> -}
> ...+>
> }
> 
> @rule_2@
> identifier dsi_var;
> identifier r;
> identifier func;
> type t;
> position p;
> expression dsi_device;
> expression list es;
> @@
> t func(...) {
> ...
> struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi_var };
> <+...
> (
> -r = msleep(es)@p;
> +r = mipi_dsi_msleep(&dsi_ctx,es);
> |
> -msleep(es)@p;
> +mipi_dsi_msleep(&dsi_ctx,es);
> |
> -r = usleep_range(es)@p;
> +r = mipi_dsi_usleep_range(&dsi_ctx,es);
> |
> -usleep_range(es)@p;
> +mipi_dsi_usleep_range(&dsi_ctx,es);
> )
> ...+>
> }
> 
> @rule_3@
> identifier dsi_var;
> identifier func;
> type t;
> position p;
> expression list es;
> @@
> t func(...) {
> ...
> struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi_var };
> ...
> -return 0;
> +return dsi_ctx.accum_err;
> }
> 
> Cc: Maxime Ripard <mripard@xxxxxxxxxx>
> Cc: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> Cc: Tejas Vipin <tejasvipin76@xxxxxxxxx>
> Cc: Doug Anderson <dianders@xxxxxxxxxxxx>
> 
> Signed-off-by: Anusha Srivatsa <asrivats@xxxxxxxxxx>
> ---
>  drivers/gpu/drm/panel/panel-sharp-ls043t1le01.c | 36 ++++++++++---------------
>  1 file changed, 14 insertions(+), 22 deletions(-)
> 
> diff --git a/drivers/gpu/drm/panel/panel-sharp-ls043t1le01.c b/drivers/gpu/drm/panel/panel-sharp-ls043t1le01.c
> index 729cbb0d8403ff7c0c4b9d21774909cc298904a2..9803eaf18e95d70742ece88e82932751476fdda8 100644
> --- a/drivers/gpu/drm/panel/panel-sharp-ls043t1le01.c
> +++ b/drivers/gpu/drm/panel/panel-sharp-ls043t1le01.c
> @@ -36,15 +36,14 @@ static inline struct sharp_nt_panel *to_sharp_nt_panel(struct drm_panel *panel)
>  static int sharp_nt_panel_init(struct sharp_nt_panel *sharp_nt)
>  {
>  	struct mipi_dsi_device *dsi = sharp_nt->dsi;
> +	struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };
>  	int ret;
>  
>  	dsi->mode_flags |= MIPI_DSI_MODE_LPM;
>  
> -	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
> -	if (ret < 0)
> -		return ret;
> +	mipi_dsi_dcs_exit_sleep_mode_multi(&dsi_ctx);
>  
> -	msleep(120);
> +	mipi_dsi_msleep(&dsi_ctx, 120);
>  
>  	/* Novatek two-lane operation */
>  	ret = mipi_dsi_dcs_write(dsi, 0xae, (u8[]){ 0x03 }, 1);

Anusha. Please. Start reviewing your patches before you send them. This
is a MIPI DSI call. And it wasn't switched to _multi / context. You
should have cought this. I don't know why you didn't. Please review and
check your code before sending it upstream.


-- 
With best wishes
Dmitry