[PATCH v2] net: phy: dp83822: fix transmit amplitude if CONFIG_OF_MDIO not defined

[Dimitri Fedrau via B4 Relay]

From: Dimitri Fedrau <dimitri.fedrau@xxxxxxxxxxxx>

When CONFIG_OF_MDIO is not defined the index for selecting the transmit
amplitude voltage for 100BASE-TX is set to 0, but it should be -1, if there
is no need to modify the transmit amplitude voltage. Move initialization of
the index from dp83822_of_init to dp8382x_probe.

Fixes: 4f3735e82d8a ("net: phy: dp83822: Add support for changing the transmit amplitude voltage")
Reviewed-by: Gerhard Engleder <gerhard@xxxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@xxxxxxxxxxxx>
---
Changes in v2:
- Drop tx_amplitude_100base_tx_index_modify
- Init tx_amplitude_100base_tx_index in dp8382x_probe
- Link to v1: https://lore.kernel.org/r/20250312-dp83822-fix-transceiver-mdio-v1-1-7b69103c5ab0@xxxxxxxxxxxx
---
 drivers/net/phy/dp83822.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/phy/dp83822.c b/drivers/net/phy/dp83822.c
index 3662f3905d5ade8ad933608fcaeabb714a588418..14f36154963841dff98be5af4dfbd2760325c13d 100644
--- a/drivers/net/phy/dp83822.c
+++ b/drivers/net/phy/dp83822.c
@@ -833,7 +833,6 @@ static int dp83822_of_init(struct phy_device *phydev)
 		dp83822->set_gpio2_clk_out = true;
 	}
 
-	dp83822->tx_amplitude_100base_tx_index = -1;
 	ret = phy_get_tx_amplitude_gain(phydev, dev,
 					ETHTOOL_LINK_MODE_100baseT_Full_BIT,
 					&val);
@@ -931,6 +930,7 @@ static int dp8382x_probe(struct phy_device *phydev)
 	if (!dp83822)
 		return -ENOMEM;
 
+	dp83822->tx_amplitude_100base_tx_index = -1;
 	phydev->priv = dp83822;
 
 	return 0;

---
base-commit: bfc6c67ec2d64d0ca4e5cc3e1ac84298a10b8d62
change-id: 20250307-dp83822-fix-transceiver-mdio-ae27fed80699

Best regards,
-- 
Dimitri Fedrau <dimitri.fedrau@xxxxxxxxxxxx>