[PATCH v2] arm64: dts: qcom: ipq5424: fix and relocate uart1 gpio configurations

[Manikanta Mylavarapu]

Update the bias configuration for UART1 TX and RX pins to ensure correct
settings for RDP466.

Additionally, move the UART1 GPIO configurations from the common .dtsi
file to the RDP-specific .dts files to account for differing bias
configurations across RDPs of IPQ5424.

Fixes: 1a91d2a6021e ("arm64: dts: qcom: add IPQ5424 SoC and rdp466 board support")
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
---
Changes in V2:
	- Consolidated uart1_tx_state and uart1_rx_state nodes into a
	  single qup_uart1_default_state node, which includes the
	  configuration for both UART1 TX and RX pins.
	- Inserted a blank line before the status property in the UART1
	  node.
	- Fixed review comments from Kathiravan Thirumoorthy.

 arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts | 19 ++++++++++++++++++-
 arch/arm64/boot/dts/qcom/ipq5424.dtsi       |  7 -------
 2 files changed, 18 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts b/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts
index b9752e8d579e..f0cba6b2be70 100644
--- a/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts
+++ b/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts
@@ -102,6 +102,22 @@ &ssphy_0 {
 };
 
 &tlmm {
+	qup_uart1_default_state: qup-uart1-default-state {
+		uart1-tx-pins {
+			pins = "gpio44";
+			function = "uart1";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		uart1-rx-pins {
+			pins = "gpio43";
+			function = "uart1";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
 	spi0_default_state: spi0-default-state {
 		clk-pins {
 			pins = "gpio6";
@@ -157,8 +173,9 @@ data-pins {
 };
 
 &uart1 {
-	pinctrl-0 = <&uart1_pins>;
+	pinctrl-0 = <&qup_uart1_default_state>;
 	pinctrl-names = "default";
+
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/ipq5424.dtsi b/arch/arm64/boot/dts/qcom/ipq5424.dtsi
index 402d0a2c7bcc..0117f6422347 100644
--- a/arch/arm64/boot/dts/qcom/ipq5424.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5424.dtsi
@@ -262,13 +262,6 @@ tlmm: pinctrl@1000000 {
 			gpio-ranges = <&tlmm 0 0 50>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-
-			uart1_pins: uart1-state {
-				pins = "gpio43", "gpio44";
-				function = "uart1";
-				drive-strength = <8>;
-				bias-pull-up;
-			};
 		};
 
 		gcc: clock-controller@1800000 {

base-commit: da920b7df701770e006928053672147075587fb2
-- 
2.34.1