[PATCH] arm64: dts: qcom: x1e001de-devkit: fix USB retimer reset polarity

[Johan Hovold]

The ps8830 retimer reset is active low.

Fix up the retimer nodes which were based on an early version of the
driver which inverted the polarity.

Fixes: 019e1ee32fec ("arm64: dts: qcom: x1e001de-devkit: Enable external DP support")
Cc: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/x1e001de-devkit.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts b/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts
index f92bda2d34f2..dc1a8f5d485a 100644
--- a/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts
+++ b/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts
@@ -788,7 +788,7 @@ typec-mux@8 {
 		vddat-supply = <&vreg_rtmr2_1p15>;
 		vddio-supply = <&vreg_rtmr2_1p8>;
 
-		reset-gpios = <&tlmm 185 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&tlmm 185 GPIO_ACTIVE_LOW>;
 
 		orientation-switch;
 		retimer-switch;
@@ -843,7 +843,7 @@ typec-mux@8 {
 		vddat-supply = <&vreg_rtmr0_1p15>;
 		vddio-supply = <&vreg_rtmr0_1p8>;
 
-		reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>;
 
 		retimer-switch;
 		orientation-switch;
@@ -898,7 +898,7 @@ typec-mux@8 {
 		vddat-supply = <&vreg_rtmr1_1p15>;
 		vddio-supply = <&vreg_rtmr1_1p8>;
 
-		reset-gpios = <&tlmm 176 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>;
 
 		retimer-switch;
 		orientation-switch;
-- 
2.48.1