Re: [PATCH 3/4] arm64: dts: qcom: sa8775p: add support for video node

[Konrad Dybcio]

On 3/18/25 3:24 PM, Vikash Garodia wrote:
> 
> On 3/15/2025 7:13 PM, Konrad Dybcio wrote:
>> On 3/11/25 1:03 PM, Vikash Garodia wrote:
>>> Video node enables video on Qualcomm SA8775P platform.
>>>
>>> Signed-off-by: Vikash Garodia <quic_vgarodia@xxxxxxxxxxx>
>>> ---
>>>  arch/arm64/boot/dts/qcom/sa8775p.dtsi | 67 +++++++++++++++++++++++++++++++++++
>>>  1 file changed, 67 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
>>> index 3394ae2d13003417a15e64c9e47833725ec779e6..09db8e2eb578f1cada0f4a15e3f844dc097bd46d 100644
>>> --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
>>> +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
>>> @@ -10,6 +10,7 @@
>>>  #include <dt-bindings/clock/qcom,sa8775p-dispcc.h>
>>>  #include <dt-bindings/clock/qcom,sa8775p-gcc.h>
>>>  #include <dt-bindings/clock/qcom,sa8775p-gpucc.h>
>>> +#include <dt-bindings/clock/qcom,sa8775p-videocc.h>
>>>  #include <dt-bindings/dma/qcom-gpi.h>
>>>  #include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h>
>>>  #include <dt-bindings/mailbox/qcom-ipcc.h>
>>> @@ -3783,6 +3784,72 @@ llcc: system-cache-controller@9200000 {
>>>  			interrupts = <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>;
>>>  		};
>>>  
>>> +		iris: video-codec@aa00000 {
>>> +			compatible = "qcom,sa8775p-iris";
>>> +
>>> +			reg = <0 0x0aa00000 0 0xf0000>;
>>> +			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
>>> +
>>> +			power-domains = <&videocc VIDEO_CC_MVS0C_GDSC>,
>>> +					<&videocc VIDEO_CC_MVS0_GDSC>,
>>> +					<&rpmhpd SA8775P_MXC>,
>>> +					<&rpmhpd SA8775P_MMCX>;
>>> +			power-domain-names = "venus",
>>> +					     "vcodec0",
>>> +					     "mx",
>>> +					     "mmcx";
>>> +			operating-points-v2 = <&iris_opp_table>;
>>> +
>>> +			clocks = <&gcc GCC_VIDEO_AXI0_CLK>,
>>> +				 <&videocc VIDEO_CC_MVS0C_CLK>,
>>> +				 <&videocc VIDEO_CC_MVS0_CLK>;
>>> +			clock-names = "iface",
>>> +				      "core",
>>> +				      "vcodec0_core";
>>> +
>>> +			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
>>> +					&config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ALWAYS>,
>>
>> This path should use QCOM_ICC_TAG_ACTIVE_ONLY on both endpoints
> What is the advantage of "ALWAYS" vs "ACTIVE_ONLY". Thinking of a possibility of
> APSS power collapsed, while video hardware is processing a frame ?

That's totally okay, I'm requesting ACTIVE_ONLY just on the cpu-cfg path,
which must not be used if APSS if offline anyway

Konrad