[PATCH net-next v6 2/7] net: phy: aquantia: add probe function to aqr105 for firmware loading

[Hans-Frieder Vogt via B4 Relay]

From: Hans-Frieder Vogt <hfdevel@xxxxxxx>

Re-use the AQR107 probe function to load the firmware on the AQR105 (and
to probe the HWMON).

Signed-off-by: Hans-Frieder Vogt <hfdevel@xxxxxxx>
Reviewed-by: Andrew Lunn <andrew@xxxxxxx>
---
 drivers/net/phy/aquantia/aquantia_main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/phy/aquantia/aquantia_main.c b/drivers/net/phy/aquantia/aquantia_main.c
index e42ace4e682aacf56199b7fdb9613d20f240fa27..86b0e63de5d88fa1050919a8826bdbec4bbcf8ba 100644
--- a/drivers/net/phy/aquantia/aquantia_main.c
+++ b/drivers/net/phy/aquantia/aquantia_main.c
@@ -912,6 +912,7 @@ static struct phy_driver aqr_driver[] = {
 	PHY_ID_MATCH_MODEL(PHY_ID_AQR105),
 	.name		= "Aquantia AQR105",
 	.config_aneg    = aqr_config_aneg,
+	.probe		= aqr107_probe,
 	.config_intr	= aqr_config_intr,
 	.handle_interrupt = aqr_handle_interrupt,
 	.read_status	= aqr_read_status,

-- 
2.47.2