Re: [PATCH v4 1/2] dt-bindings: iio: light: bh1750: Add reset-gpios property

[Krzysztof Kozlowski]

On Tue, Mar 18, 2025 at 08:45:54PM +0100, Sergio Perez wrote:

Your threading is completely broken.

Read my last message - I gave you clear instructions which you did not
follow. Why?

>  
> +  reset-gpios:
> +    description: GPIO connected to the sensor's reset line (active low)

"Active low reset line". No point to say that GPIO is a "GPIO connected
to the...", because it cannot be anything else.

> +    maxItems: 1
> +
>  required:
>    - compatible
>    - reg
> @@ -39,6 +43,7 @@ examples:
>        light-sensor@23 {
>          compatible = "rohm,bh1750";
>          reg = <0x23>;
> +        reset-gpios = <&gpio2 17 0>;

1. Include header and use proper defines
2. And then you will see that it is not active low, like you claim in
description...

>        };
>      };
>  
> -- 
> 2.43.0
>