[PATCH v2 1/5] iio: adc: ad400: Set transfer bits_per_word to have data in CPU endianness

[Marcelo Schmitt]

When SPI `bits_per_word` is not set, SPI transfers default 8-bit word size
and ADC data gets stored in big-endian format in memory. Because of that,
the IIO driver requests ADC data to be rearranged from BE to CPU
endianness. However, with `bits_per_word` set to the number of ADC
precision bits, transfers use larger word sizes that get stored in
'in-memory wordsizes' and can be read in CPU endianness.

Use proper `bits_per_word` size for SPI transfers thus saving the driver
from requesting endianness conversions. With that, shifting the buffer
data is also no longer needed. This change has no impact on IIO device
functionality.

Signed-off-by: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
---
 drivers/iio/adc/ad4000.c | 18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

diff --git a/drivers/iio/adc/ad4000.c b/drivers/iio/adc/ad4000.c
index 4fe8dee48da9..19bc021e1b5d 100644
--- a/drivers/iio/adc/ad4000.c
+++ b/drivers/iio/adc/ad4000.c
@@ -50,8 +50,7 @@
 		.sign = _sign,							\
 		.realbits = _real_bits,						\
 		.storagebits = _storage_bits,					\
-		.shift = _storage_bits - _real_bits,				\
-		.endianness = IIO_BE,						\
+		.endianness = IIO_CPU,						\
 	},									\
 }
 
@@ -79,8 +78,7 @@
 		.sign = _sign,							\
 		.realbits = _real_bits,						\
 		.storagebits = _storage_bits,					\
-		.shift = _storage_bits - _real_bits,				\
-		.endianness = IIO_BE,						\
+		.endianness = IIO_CPU,						\
 	},									\
 }
 
@@ -411,8 +409,8 @@ struct ad4000_state {
 	 */
 	struct {
 		union {
-			__be16 sample_buf16;
-			__be32 sample_buf32;
+			u16 sample_buf16;
+			u32 sample_buf32;
 		} data;
 		aligned_s64 timestamp;
 	} scan __aligned(IIO_DMA_MINALIGN);
@@ -516,11 +514,9 @@ static int ad4000_single_conversion(struct iio_dev *indio_dev,
 		return ret;
 
 	if (chan->scan_type.storagebits > 16)
-		sample = be32_to_cpu(st->scan.data.sample_buf32);
+		sample = st->scan.data.sample_buf32;
 	else
-		sample = be16_to_cpu(st->scan.data.sample_buf16);
-
-	sample >>= chan->scan_type.shift;
+		sample = st->scan.data.sample_buf16;
 
 	if (chan->scan_type.sign == 's')
 		*val = sign_extend32(sample, chan->scan_type.realbits - 1);
@@ -689,6 +685,7 @@ static int ad4000_prepare_3wire_mode_message(struct ad4000_state *st,
 	xfers[0].cs_change_delay.unit = SPI_DELAY_UNIT_NSECS;
 
 	xfers[1].rx_buf = &st->scan.data;
+	xfers[1].bits_per_word = chan->scan_type.realbits;
 	xfers[1].len = BITS_TO_BYTES(chan->scan_type.storagebits);
 	xfers[1].delay.value = st->time_spec->t_quiet2_ns;
 	xfers[1].delay.unit = SPI_DELAY_UNIT_NSECS;
@@ -719,6 +716,7 @@ static int ad4000_prepare_4wire_mode_message(struct ad4000_state *st,
 	xfers[0].delay.unit = SPI_DELAY_UNIT_NSECS;
 
 	xfers[1].rx_buf = &st->scan.data;
+	xfers[1].bits_per_word = chan->scan_type.realbits;
 	xfers[1].len = BITS_TO_BYTES(chan->scan_type.storagebits);
 
 	spi_message_init_with_transfers(&st->msg, st->xfers, 2);
-- 
2.47.2