[PATCH 00/34] Samsung S2MPG10 PMIC MFD-based drivers

[André Draszik]

This series adds initial support for the Samsung S2MPG10 PMIC using the
MFD framework. This is a PMIC for mobile applications and is used on
the Google Pixel 6 and 6 Pro (oriole / raven).

*** dependency note ***

This depends on the Samsung ACPM driver in Linux next, and runtime
depends on some fixes for it:
https://lore.kernel.org/all/20250321-acpm-atomic-v1-0-fb887bde7e61@xxxxxxxxxx/
https://lore.kernel.org/all/20250319-acpm-fixes-v2-0-ac2c1bcf322b@xxxxxxxxxx/

*** dependency note end ***

+++ Kconfig update +++

There is a Kconfig symbol update in this series, because the existing
Samsung S2M driver has been split into core and transport (I2C & ACPM)
parts. CONFIG_MFD_SEC_CORE is now truly a core driver, and
the I2C code that was part of it is now enabled via CONFIG_MFD_SEC_I2C.

This was necessary because unlike the other S2M PMICs, S2MPG10 doesn't
talk via I2C, but via the Samsung ACPM firmware.

+++ Kconfig update end +++

This series must be applied in-order, due to interdependencies of some
of the patches. There are also various cleanup patches to the S2M
drivers. I've kept them ordered as:
  * DT bindings (patches 1 ... 2)
  * EXPORT_SYMBOL ACPM's devm_acpm_get_by_phandle() (patch 3)
  * S2M MFD prep for adding S2MPG10 to MFD core (patches 4 ... 11)
  * S2MPG10 core driver (patch 12)
  * S2M MFD cleanup patches (patches 14 ... 25)
  * S2MPG10 clock driver (patch 26)
  * S2M RTC prep for adding S2MPG10 (patch 27 ... 28)
  * S2MPG10 RTC driver (patch 29)
  * S2M RTC cleanup patches (patches 30 ... 33)

I realise these are many, but since some prep-work was required to be
able to add S2MPG anyway, I wanted to get the cleanup patches in as
well :-) Let me know if I should postpone them to a later date instead.

The S2MPG10 includes buck converters, various LDOs, power meters, RTC,
clock outputs, and additional GPIOs interfaces.

This series adds support in the top-level device driver, and for the
RTC and clock. Importantly, having the RTC driver allows to do a proper
reset of the system. Drivers or driver updates for the other components
will be added in future patches.

This will need a DT update for Oriole / Raven to enable this device. I
will send that out separately.

Cheers,
Andre'

Signed-off-by: André Draszik <andre.draszik@xxxxxxxxxx>
---
André Draszik (34):
      dt-bindings: mfd: samsung,s2mps11: add s2mpg10
      dt-bindings: clock: samsung,s2mps11: add s2mpg10
      firmware: exynos-acpm: export devm_acpm_get_by_phandle()
      mfd: sec: drop non-existing forward declarations
      mfd: sec: sort includes alphabetically
      mfd: sec: update includes to add missing and remove superfluous ones
      mfd: sec: move private internal API to internal header
      mfd: sec: fix open parenthesis alignment (of_property_read_bool)
      mfd: sec: slightly rework runtime platform data allocation
      mfd: sec: split into core and transport (i2c) drivers
      defconfigs: rename CONFIG_MFD_SEC_CORE to CONFIG_MFD_SEC_I2C
      mfd: sec: add support for S2MPG10 PMIC
      mfd: sec: merge separate core and irq modules
      mfd: sec: sort struct of_device_id entries and the device type switch
      mfd: sec: use dev_err_probe() where appropriate
      mfd: sec: s2dos05/s2mpu05: use explicit regmap config
      mfd: sec: drop generic regmap config
      mfd: sec: s2dos05: doesn't support interrupts (it seems)
      mfd: sec: don't ignore errors from sec_irq_init()
      mfd: sec: rework platform data and regmap instantiating
      mfd: sec: change device_type to int
      mfd: sec: don't compare against NULL / 0 for errors, use !
      mfd: sec: use sizeof(*var), not sizeof(struct type_of_var)
      mfd: sec: convert to using MFD_CELL macros
      mfd: sec: convert to using REGMAP_IRQ_REG() macros
      clk: s2mps11: add support for S2MPG10 PMIC clock
      rtc: s5m: cache value of platform_get_device_id() during probe
      rtc: s5m: prepare for external regmap
      rtc: s5m: add support for S2MPG10 RTC
      rtc: s5m: fix a typo: peding -> pending
      rtc: s5m: switch to devm_device_init_wakeup
      rtc: s5m: replace regmap_update_bits with regmap_clear/set_bits
      rtc: s5m: replace open-coded read/modify/write registers with regmap helpers
      MAINTAINERS: add myself as reviewer for Samsung S2M MFD

 .../devicetree/bindings/clock/samsung,s2mps11.yaml |   1 +
 .../devicetree/bindings/mfd/samsung,s2mps11.yaml   |  34 +-
 MAINTAINERS                                        |   3 +-
 arch/arm/configs/exynos_defconfig                  |   2 +-
 arch/arm/configs/multi_v7_defconfig                |   2 +-
 arch/arm/configs/pxa_defconfig                     |   2 +-
 arch/arm64/configs/defconfig                       |   2 +-
 drivers/clk/clk-s2mps11.c                          |   8 +
 drivers/firmware/samsung/exynos-acpm.c             |   1 +
 drivers/mfd/Kconfig                                |  35 +-
 drivers/mfd/Makefile                               |   5 +-
 drivers/mfd/sec-acpm.c                             | 471 ++++++++++++++++++++
 drivers/mfd/sec-common.c                           | 284 ++++++++++++
 drivers/mfd/sec-core.c                             | 481 ---------------------
 drivers/mfd/sec-core.h                             |  32 ++
 drivers/mfd/sec-i2c.c                              | 259 +++++++++++
 drivers/mfd/sec-irq.c                              | 461 +++++++-------------
 drivers/rtc/rtc-s5m.c                              | 197 ++++++---
 include/linux/mfd/samsung/core.h                   |   7 +-
 include/linux/mfd/samsung/irq.h                    | 103 +++++
 include/linux/mfd/samsung/rtc.h                    |  37 ++
 include/linux/mfd/samsung/s2mpg10.h                | 310 +++++++++++++
 22 files changed, 1872 insertions(+), 865 deletions(-)
---
base-commit: c4d4884b67802c41fd67399747165d65c770621a
change-id: 20250321-s2mpg10-ef5d1ebd3043

Best regards,
-- 
André Draszik <andre.draszik@xxxxxxxxxx>