Re: [PATCH v3 2/2] arm64: dts: qcom: qcs8300-ride: enable WLAN on qcs8300-ride

[Stone Zhang]

On 3/19/2025 6:13 PM, Dmitry Baryshkov wrote:
> On Tue, Mar 18, 2025 at 05:33:50PM +0800, Stone Zhang wrote:
> > Enable WLAN on qcs8300-ride by adding a node for the PMU module
> > of the WCN6855 and assigning its LDO power outputs to the existing
> > WiFi module.
> >
> > Signed-off-by: Stone Zhang <quic_stonez@xxxxxxxxxxx>
> > ---
> >   arch/arm64/boot/dts/qcom/qcs8300-ride.dts | 108 ++++++++++++++++++++++
> >   1 file changed, 108 insertions(+)
> >
> > @@ -320,6 +402,25 @@ &pcie1_phy {
> >   	status = "okay";
> >   };
> >   
> > +&pcieport0 {
> > +	wifi@0 {
> > +		compatible = "pci17cb,1103";
> > +		reg = <0x10000 0x0 0x0 0x0 0x0>;
> > +
> > +		qcom,ath11k-calibration-variant = "QC_QCS8300_Ride";
>
> Almost missed it. What is your baseline? Krzysztof has sent his
> qcom,calibration-variant patches [1] in February. Bjorn has picked them
> up on March 4th.
>
> This needs to be rebased on top of [1].
Understood.
> [1] https://lore.kernel.org/linux-arm-msm/20250225-dts-qcom-wifi-calibration-v1-0-347e9c72dcfc@xxxxxxxxxx/
>
> > +
> > +		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
> > +		vddaon-supply = <&vreg_pmu_aon_0p59>;
> > +		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
> > +		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
> > +		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
> > +		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
> > +		vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
> > +		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
> > +		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
> > +	};
> > +};
> > +
> >   &qupv3_id_0 {
> >   	status = "okay";
> >   };