Re: [PATCH v2 07/11] dt-bindings: phy: Add documentation for Airoha AN7581 USB PHY
From: Rob Herring
Date: Mon Mar 24 2025 - 11:50:14 EST
On Thu, Mar 20, 2025 at 02:00:30PM +0100, Christian Marangi wrote:
> Add documentation for Airoha AN7581 USB PHY that describe the USB PHY
> for the USB controller.
>
> Airoha AN7581 SoC support a maximum of 2 USB port. The USB 2.0 mode is
> always supported. The USB 3.0 mode is optional and depends on the Serdes
> mode currently configured on the system for the USB port.
>
> If the airoha,serdes-port property is not declared, it's assumed USB 3.0
> mode is not supported, as the Serdes mode can't be validated.
>
> Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
> ---
> .../bindings/phy/airoha,an7581-usb-phy.yaml | 83 +++++++++++++++++++
> MAINTAINERS | 7 ++
> .../dt-bindings/phy/airoha,an7581-usb-phy.h | 11 +++
> 3 files changed, 101 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/airoha,an7581-usb-phy.yaml
> create mode 100644 include/dt-bindings/phy/airoha,an7581-usb-phy.h
>
> diff --git a/Documentation/devicetree/bindings/phy/airoha,an7581-usb-phy.yaml b/Documentation/devicetree/bindings/phy/airoha,an7581-usb-phy.yaml
> new file mode 100644
> index 000000000000..39ceaded5d0e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/airoha,an7581-usb-phy.yaml
> @@ -0,0 +1,83 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/airoha,an7581-usb-phy.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Airoha AN7581 SoC USB PHY
> +
> +maintainers:
> + - Christian Marangi <ansuelsmth@xxxxxxxxx>
> +
> +description: >
> + The Airoha AN7581 SoC USB PHY describes the USB PHY for the USB controller.
> +
> + Airoha AN7581 SoC support a maximum of 2 USB port. The USB 2.0 mode is
> + always supported. The USB 3.0 mode is optional and depends on the Serdes
> + mode currently configured on the system for the USB port.
> +
> + If the airoha,serdes-port property is not declared, it's assumed USB 3.0
> + mode is not supported, as the Serdes mode can't be validated.
> +
> +properties:
> + compatible:
> + const: airoha,an7581-usb-phy
> +
> + reg:
> + maxItems: 1
> +
> +
> + airoha,usb2-monitor-clk-sel:
> + description: Describe what oscillator across the available 4
> + should be selected for USB 2.0 Slew Rate calibration.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [0, 1, 2, 3]
> +
> + airoha,serdes-port:
> + description: Describe what Serdes Port is attached to the USB 3.0 port.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [0, 1, 2, 3]
Since you only have a single value here, does that mean only only one of
the 2 ports/phys supports USB3?
> +
> + airoha,scu:
> + description: Phandle to the SCU node for USB 3.0 Serdes mode validation.
> + $ref: /schemas/types.yaml#/definitions/phandle
A bit unusual, but you could use the phys binding here instead of these
2 properties. The phy for the phy...
> +
> + '#phy-cells':
> + const: 1
Please add a description of what's in the cell.
> +
> +required:
> + - compatible
> + - reg
> + - airoha,usb2-monitor-clk-sel
> + - '#phy-cells'
> +
> +dependentRequired:
> + airoha,serdes-port: [ 'airoha,scu' ]
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/phy/airoha,an7581-usb-phy.h>
> + #include <dt-bindings/soc/airoha,scu-ssr.h>
> +
> + phy@1fac0000 {
> + compatible = "airoha,an7581-usb-phy";
> + reg = <0x1fac0000 0x10000>;
> +
> + airoha,usb2-monitor-clk-sel = <AIROHA_USB2_MONCLK_SEL1>;
> + airoha,scu = <&scu>;
> + airoha,serdes-port = <AIROHA_SCU_SERDES_USB1>;
> +
> + #phy-cells = <1>;
> + };
> +
> + phy@1fae0000 {
> + compatible = "airoha,an7581-usb-phy";
> + reg = <0x1fae0000 0x10000>;
> +
> + airoha,usb2-monitor-clk-sel = <AIROHA_USB2_MONCLK_SEL2>;
> +
> + #phy-cells = <1>;
> + };
Drop the 2nd example.
Rob