Re: [PATCH 2/3] arm64: qcom: sc7280: Move phy, perst to root port node

[Konrad Dybcio]

On 3/22/25 4:00 AM, Krishna Chaitanya Chundru wrote:
> Move phy, perst, to root port from the controller node.
> 
> Rename perst-gpios to reset-gpios to align with the expected naming
> convention of pci-bus-common.yaml.
> 
> Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@xxxxxxxxxxxxxxxx>
> ---

[...]

> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index 0f2caf36910b..6c21c320a2b5 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -2271,9 +2271,6 @@ pcie1: pcie@1c08000 {
>  
>  			power-domains = <&gcc GCC_PCIE_1_GDSC>;
>  
> -			phys = <&pcie1_phy>;
> -			phy-names = "pciephy";
> -
>  			pinctrl-names = "default";
>  			pinctrl-0 = <&pcie1_clkreq_n>;
>  
> @@ -2284,7 +2281,7 @@ pcie1: pcie@1c08000 {
>  
>  			status = "disabled";
>  
> -			pcie@0 {
> +			pcieport1: pcie@0 {

pcie1_port0 (or pcie1_port), please

Konrad