[PATCH v2 11/13] PCI: apple: Use gpiod_set_value_cansleep in probe flow

[Marc Zyngier]

From: Hector Martin <marcan@xxxxxxxxx>

We're allowed to sleep here, so tell the GPIO core by using
gpiod_set_value_cansleep instead of gpiod_set_value.

Fixes: 1e33888fbe44 ("PCI: apple: Add initial hardware bring-up")
Signed-off-by: Hector Martin <marcan@xxxxxxxxx>
Signed-off-by: Alyssa Rosenzweig <alyssa@xxxxxxxxxxxxx>
Signed-off-by: Marc Zyngier <maz@xxxxxxxxxx>
---
 drivers/pci/controller/pcie-apple.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/controller/pcie-apple.c b/drivers/pci/controller/pcie-apple.c
index c00ec0781fabc..505adf64bd66d 100644
--- a/drivers/pci/controller/pcie-apple.c
+++ b/drivers/pci/controller/pcie-apple.c
@@ -562,7 +562,7 @@ static int apple_pcie_setup_port(struct apple_pcie *pcie,
 	rmw_set(PORT_APPCLK_EN, port->base + PORT_APPCLK);
 
 	/* Assert PERST# before setting up the clock */
-	gpiod_set_value(reset, 1);
+	gpiod_set_value_cansleep(reset, 1);
 
 	ret = apple_pcie_setup_refclk(pcie, port);
 	if (ret < 0)
@@ -573,7 +573,7 @@ static int apple_pcie_setup_port(struct apple_pcie *pcie,
 
 	/* Deassert PERST# */
 	rmw_set(PORT_PERST_OFF, port->base + PORT_PERST);
-	gpiod_set_value(reset, 0);
+	gpiod_set_value_cansleep(reset, 0);
 
 	/* Wait for 100ms after PERST# deassertion (PCIe r5.0, 6.6.1) */
 	msleep(100);
-- 
2.39.2