[PATCH v1] ALSA: hda/tas2781: Support dsp firmware Alpha and Beta seaies

[Shenghao Ding]

For calibration data, basic version firmware does not contain any
calibration addresses, it depends on calibration tool to convey the
addresses to the driver. Since Alpha and Beta firmware, all the
calibration addresses are saved into the firmware.

Signed-off-by: Shenghao Ding <shenghao-ding@xxxxxx>

---
v1:
 - Add updating calibration addresses code into tas2781_apply_calib in
   case of Alpha and Beta firmware.
---
 sound/pci/hda/tas2781_hda_i2c.c | 30 ++++++++++++++++++++----------
 1 file changed, 20 insertions(+), 10 deletions(-)

diff --git a/sound/pci/hda/tas2781_hda_i2c.c b/sound/pci/hda/tas2781_hda_i2c.c
index 50c5e5f26589..cb3d683013d9 100644
--- a/sound/pci/hda/tas2781_hda_i2c.c
+++ b/sound/pci/hda/tas2781_hda_i2c.c
@@ -558,28 +558,38 @@ static int tas2563_save_calibration(struct tasdevice_priv *tas_priv)
 
 static void tas2781_apply_calib(struct tasdevice_priv *tas_priv)
 {
-	static const unsigned char page_array[CALIB_MAX] = {
-		0x17, 0x18, 0x18, 0x13, 0x18,
+	struct calidata *cali_data = &tas_priv->cali_data;
+	struct cali_reg *r = &cali_data->cali_reg_array;
+	unsigned int cali_reg[CALIB_MAX] = {
+		TASDEVICE_REG(0, 0x17, 0x74),
+		TASDEVICE_REG(0, 0x18, 0x0c),
+		TASDEVICE_REG(0, 0x18, 0x14),
+		TASDEVICE_REG(0, 0x13, 0x70),
+		TASDEVICE_REG(0, 0x18, 0x7c),
 	};
-	static const unsigned char rgno_array[CALIB_MAX] = {
-		0x74, 0x0c, 0x14, 0x70, 0x7c,
-	};
-	int offset = 0;
 	int i, j, rc;
+	int oft = 0;
 	__be32 data;
 
+	if (tas_priv->dspbin_typ != TASDEV_BASIC) {
+		cali_reg[0] = r->r0_reg;
+		cali_reg[1] = r->invr0_reg;
+		cali_reg[2] = r->r0_low_reg;
+		cali_reg[3] = r->pow_reg;
+		cali_reg[4] = r->tlimit_reg;
+	}
+
 	for (i = 0; i < tas_priv->ndev; i++) {
 		for (j = 0; j < CALIB_MAX; j++) {
 			data = cpu_to_be32(
-				*(uint32_t *)&tas_priv->cali_data.data[offset]);
+				*(uint32_t *)&tas_priv->cali_data.data[oft]);
 			rc = tasdevice_dev_bulk_write(tas_priv, i,
-				TASDEVICE_REG(0, page_array[j], rgno_array[j]),
-				(unsigned char *)&data, 4);
+				cali_reg[j], (unsigned char *)&data, 4);
 			if (rc < 0)
 				dev_err(tas_priv->dev,
 					"chn %d calib %d bulk_wr err = %d\n",
 					i, j, rc);
-			offset += 4;
+			oft += 4;
 		}
 	}
 }
-- 
2.34.1