[PATCH 3/5] arm: dts: Adjust the 'reg' range for imx287 L2 switch description

[Lukasz Majewski]

The current range of 'reg' property is too small to allow full control
of the L2 switch on imx287.

As this IP block also uses ENET-MAC blocks for its operation, the address
range for it must be included as well.

Signed-off-by: Lukasz Majewski <lukma@xxxxxxx>
---
 arch/arm/boot/dts/nxp/mxs/imx28.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/nxp/mxs/imx28.dtsi b/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
index bbea8b77386f..8f2aa32208cf 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
+++ b/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
@@ -1321,8 +1321,8 @@ mac1: ethernet@800f4000 {
 			status = "disabled";
 		};
 
-		eth_switch: switch@800f8000 {
-			reg = <0x800f8000 0x8000>;
+		eth_switch: switch@800f0000 {
+			reg = <0x800f0000 0x20000>;
 			status = "disabled";
 		};
 	};
-- 
2.39.5