[PATCH v3] dt-bindings: edac: altera: socfpga: Convert to YAML
From: Matthew Gerlach
Date: Tue Mar 25 2025 - 13:32:07 EST
Convert the device tree bindings for the Altera SoCFPGA ECC
Manager from text to yaml.
Signed-off-by: Matthew Gerlach <matthew.gerlach@xxxxxxxxxx>
---
v3:
- Remove redundant $ref and description from compatible entries.
- Add $ref and description for altr,sysmgr-syscon entry.
- Fix description of altr,ecc-parent of sdmmca-ecc@ff8c8c00.
- Successfully validated Cyclone5, Arria5/10, Stratix10, and Agilex.
- Rename yaml file.
v2:
- Fix $id: path.
- Remove unneeded '|'.
- Move vendor properties last (but before child nodes).
- Add appropriate blank lines.
- Don't break ABI.
- Avoid changing existing DTSI and DTS.
---
.../edac/altr,socfpga-ecc-manager.yaml | 323 +++++++++++++++
.../bindings/edac/socfpga-eccmgr.txt | 383 ------------------
MAINTAINERS | 5 +
3 files changed, 328 insertions(+), 383 deletions(-)
create mode 100644 Documentation/devicetree/bindings/edac/altr,socfpga-ecc-manager.yaml
delete mode 100644 Documentation/devicetree/bindings/edac/socfpga-eccmgr.txt
diff --git a/Documentation/devicetree/bindings/edac/altr,socfpga-ecc-manager.yaml b/Documentation/devicetree/bindings/edac/altr,socfpga-ecc-manager.yaml
new file mode 100644
index 000000000000..ec4634c5fa89
--- /dev/null
+++ b/Documentation/devicetree/bindings/edac/altr,socfpga-ecc-manager.yaml
@@ -0,0 +1,323 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2025 Altera Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/edac/altr,socfpga-ecc-manager.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera SoCFPGA ECC Manager
+
+maintainers:
+ - Matthew Gerlach <matthew.gerlach@xxxxxxxxxx>
+
+description:
+ This binding describes the device tree nodes required for the Altera SoCFPGA
+ ECC Manager for the Cyclone5, Arria5, Arria10, Stratix10, and Agilex chip
+ families.
+
+properties:
+
+ compatible:
+ oneOf:
+ - items:
+ - const: altr,socfpga-s10-ecc-manager
+ - const: altr,socfpga-a10-ecc-manager
+ - const: altr,socfpga-a10-ecc-manager
+ - const: altr,socfpga-ecc-manager
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+ interrupts:
+ minItems: 1
+ maxItems: 2
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 2
+
+ ranges: true
+
+ altr,sysmgr-syscon:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: phandle to Stratix10 System Manager Block with the ECC manager registers
+
+ sdramedac:
+ type: object
+ additionalProperties: false
+
+ properties:
+ compatible:
+ enum:
+ - altr,sdram-edac-a10
+ - altr,sdram-edac-s10
+
+ interrupts:
+ minItems: 1
+ maxItems: 2
+
+ altr,sdr-syscon:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: phandle to SDRAM parent
+
+ required:
+ - compatible
+ - interrupts
+ - altr,sdr-syscon
+
+patternProperties:
+ "^ocram-ecc@[a-f0-9]+$":
+ type: object
+ additionalProperties: false
+
+ properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: altr,socfpga-s10-ocram-ecc
+ - const: altr,socfpga-a10-ocram-ecc
+ - const: altr,socfpga-a10-ocram-ecc
+ - const: altr,socfpga-ocram-ecc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 1
+ maxItems: 2
+
+ iram:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: phandle to OCRAM parent
+
+ altr,ecc-parent:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: phandle to OCRAM parent
+
+ required:
+ - compatible
+ - reg
+ - interrupts
+
+ "^usb[0-9]-ecc@[a-f0-9]+$":
+ type: object
+ additionalProperties: false
+
+ properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: altr,socfpga-s10-usb-ecc
+ - const: altr,socfpga-usb-ecc
+ - const: altr,socfpga-usb-ecc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 1
+ maxItems: 2
+
+ altr,ecc-parent:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: phandle to USB parent
+
+ required:
+ - compatible
+ - reg
+ - interrupts
+ - altr,ecc-parent
+
+ "^emac[0-9]-[t,r]x-ecc@[a-f0-9]+$":
+ type: object
+ additionalProperties: false
+
+ properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: altr,socfpga-s10-eth-mac-ecc
+ - const: altr,socfpga-eth-mac-ecc
+ - const: altr,socfpga-eth-mac-ecc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 1
+ maxItems: 2
+
+ altr,ecc-parent:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: phandle to ethernet parent
+
+ required:
+ - compatible
+ - reg
+ - interrupts
+ - altr,ecc-parent
+
+ "^sdmmc[a-f]-ecc@[a-f0-9]+$":
+ type: object
+ additionalProperties: false
+
+ properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: altr,socfpga-s10-sdmmc-ecc
+ - const: altr,socfpga-sdmmc-ecc
+ - const: altr,socfpga-sdmmc-ecc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 2
+ maxItems: 4
+
+ altr,ecc-parent:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: phandle to SD/MMC parent
+
+ required:
+ - compatible
+ - reg
+ - interrupts
+ - altr,ecc-parent
+
+ "^l2-ecc@[a-f0-9]+$":
+ type: object
+ additionalProperties: false
+
+ properties:
+ compatible:
+ enum:
+ - altr,socfpga-a10-l2-ecc
+ - altr,socfpga-l2-ecc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 2
+
+ required:
+ - compatible
+ - reg
+ - interrupts
+
+ "^dma-ecc@[a-f0-9]+$":
+ type: object
+ additionalProperties: false
+
+ properties:
+ compatible:
+ const: altr,socfpga-dma-ecc
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 2
+
+ altr,ecc-parent:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: phandle to SD/MMC parent
+
+ required:
+ - compatible
+ - reg
+ - interrupts
+ - altr,ecc-parent
+
+if:
+ properties:
+ compatible:
+ contains:
+ const: altr,socfpga-ecc-manager
+then:
+ required:
+ - compatible
+ - "#address-cells"
+ - "#size-cells"
+ - ranges
+
+else:
+ required:
+ - compatible
+ - "#address-cells"
+ - "#size-cells"
+ - interrupts
+ - interrupt-controller
+ - "#interrupt-cells"
+ - ranges
+ - altr,sysmgr-syscon
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ eccmgr {
+ compatible = "altr,socfpga-s10-ecc-manager",
+ "altr,socfpga-a10-ecc-manager";
+ altr,sysmgr-syscon = <&sysmgr>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ ranges;
+
+ sdramedac {
+ compatible = "altr,sdram-edac-s10";
+ altr,sdr-syscon = <&sdr>;
+ interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ ocram-ecc@ff8cc000 {
+ compatible = "altr,socfpga-s10-ocram-ecc",
+ "altr,socfpga-a10-ocram-ecc";
+ reg = <0xff8cc000 0x100>;
+ altr,ecc-parent = <&ocram>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ usb0-ecc@ff8c4000 {
+ compatible = "altr,socfpga-s10-usb-ecc",
+ "altr,socfpga-usb-ecc";
+ reg = <0xff8c4000 0x100>;
+ altr,ecc-parent = <&usb0>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ emac0-rx-ecc@ff8c0000 {
+ compatible = "altr,socfpga-s10-eth-mac-ecc",
+ "altr,socfpga-eth-mac-ecc";
+ reg = <0xff8c0000 0x100>;
+ altr,ecc-parent = <&gmac0>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ emac0-tx-ecc@ff8c0400 {
+ compatible = "altr,socfpga-s10-eth-mac-ecc",
+ "altr,socfpga-eth-mac-ecc";
+ reg = <0xff8c0400 0x100>;
+ altr,ecc-parent = <&gmac0>;
+ interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sdmmca-ecc@ff8c8c00 {
+ compatible = "altr,socfpga-s10-sdmmc-ecc",
+ "altr,socfpga-sdmmc-ecc";
+ reg = <0xff8c8c00 0x100>;
+ altr,ecc-parent = <&mmc>;
+ interrupts = <14 IRQ_TYPE_LEVEL_HIGH>,
+ <15 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/edac/socfpga-eccmgr.txt b/Documentation/devicetree/bindings/edac/socfpga-eccmgr.txt
deleted file mode 100644
index 8f52206cfd2a..000000000000
--- a/Documentation/devicetree/bindings/edac/socfpga-eccmgr.txt
+++ /dev/null
@@ -1,383 +0,0 @@
-Altera SoCFPGA ECC Manager
-This driver uses the EDAC framework to implement the SOCFPGA ECC Manager.
-The ECC Manager counts and corrects single bit errors and counts/handles
-double bit errors which are uncorrectable.
-
-Cyclone5 and Arria5 ECC Manager
-Required Properties:
-- compatible : Should be "altr,socfpga-ecc-manager"
-- #address-cells: must be 1
-- #size-cells: must be 1
-- ranges : standard definition, should translate from local addresses
-
-Subcomponents:
-
-L2 Cache ECC
-Required Properties:
-- compatible : Should be "altr,socfpga-l2-ecc"
-- reg : Address and size for ECC error interrupt clear registers.
-- interrupts : Should be single bit error interrupt, then double bit error
- interrupt. Note the rising edge type.
-
-On Chip RAM ECC
-Required Properties:
-- compatible : Should be "altr,socfpga-ocram-ecc"
-- reg : Address and size for ECC error interrupt clear registers.
-- iram : phandle to On-Chip RAM definition.
-- interrupts : Should be single bit error interrupt, then double bit error
- interrupt. Note the rising edge type.
-
-Example:
-
- eccmgr: eccmgr@ffd08140 {
- compatible = "altr,socfpga-ecc-manager";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- l2-ecc@ffd08140 {
- compatible = "altr,socfpga-l2-ecc";
- reg = <0xffd08140 0x4>;
- interrupts = <0 36 1>, <0 37 1>;
- };
-
- ocram-ecc@ffd08144 {
- compatible = "altr,socfpga-ocram-ecc";
- reg = <0xffd08144 0x4>;
- iram = <&ocram>;
- interrupts = <0 178 1>, <0 179 1>;
- };
- };
-
-Arria10 SoCFPGA ECC Manager
-The Arria10 SoC ECC Manager handles the IRQs for each peripheral
-in a shared register instead of individual IRQs like the Cyclone5
-and Arria5. Therefore the device tree is different as well.
-
-Required Properties:
-- compatible : Should be "altr,socfpga-a10-ecc-manager"
-- altr,sysgr-syscon : phandle to Arria10 System Manager Block
- containing the ECC manager registers.
-- #address-cells: must be 1
-- #size-cells: must be 1
-- interrupts : Should be single bit error interrupt, then double bit error
- interrupt.
-- interrupt-controller : boolean indicator that ECC Manager is an interrupt controller
-- #interrupt-cells : must be set to 2.
-- ranges : standard definition, should translate from local addresses
-
-Subcomponents:
-
-L2 Cache ECC
-Required Properties:
-- compatible : Should be "altr,socfpga-a10-l2-ecc"
-- reg : Address and size for ECC error interrupt clear registers.
-- interrupts : Should be single bit error interrupt, then double bit error
- interrupt, in this order.
-
-On-Chip RAM ECC
-Required Properties:
-- compatible : Should be "altr,socfpga-a10-ocram-ecc"
-- reg : Address and size for ECC block registers.
-- interrupts : Should be single bit error interrupt, then double bit error
- interrupt, in this order.
-
-Ethernet FIFO ECC
-Required Properties:
-- compatible : Should be "altr,socfpga-eth-mac-ecc"
-- reg : Address and size for ECC block registers.
-- altr,ecc-parent : phandle to parent Ethernet node.
-- interrupts : Should be single bit error interrupt, then double bit error
- interrupt, in this order.
-
-NAND FIFO ECC
-Required Properties:
-- compatible : Should be "altr,socfpga-nand-ecc"
-- reg : Address and size for ECC block registers.
-- altr,ecc-parent : phandle to parent NAND node.
-- interrupts : Should be single bit error interrupt, then double bit error
- interrupt, in this order.
-
-DMA FIFO ECC
-Required Properties:
-- compatible : Should be "altr,socfpga-dma-ecc"
-- reg : Address and size for ECC block registers.
-- altr,ecc-parent : phandle to parent DMA node.
-- interrupts : Should be single bit error interrupt, then double bit error
- interrupt, in this order.
-
-USB FIFO ECC
-Required Properties:
-- compatible : Should be "altr,socfpga-usb-ecc"
-- reg : Address and size for ECC block registers.
-- altr,ecc-parent : phandle to parent USB node.
-- interrupts : Should be single bit error interrupt, then double bit error
- interrupt, in this order.
-
-QSPI FIFO ECC
-Required Properties:
-- compatible : Should be "altr,socfpga-qspi-ecc"
-- reg : Address and size for ECC block registers.
-- altr,ecc-parent : phandle to parent QSPI node.
-- interrupts : Should be single bit error interrupt, then double bit error
- interrupt, in this order.
-
-SDMMC FIFO ECC
-Required Properties:
-- compatible : Should be "altr,socfpga-sdmmc-ecc"
-- reg : Address and size for ECC block registers.
-- altr,ecc-parent : phandle to parent SD/MMC node.
-- interrupts : Should be single bit error interrupt, then double bit error
- interrupt, in this order for port A, and then single bit error interrupt,
- then double bit error interrupt in this order for port B.
-
-Example:
-
- eccmgr: eccmgr@ffd06000 {
- compatible = "altr,socfpga-a10-ecc-manager";
- altr,sysmgr-syscon = <&sysmgr>;
- #address-cells = <1>;
- #size-cells = <1>;
- interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-controller;
- #interrupt-cells = <2>;
- ranges;
-
- l2-ecc@ffd06010 {
- compatible = "altr,socfpga-a10-l2-ecc";
- reg = <0xffd06010 0x4>;
- interrupts = <0 IRQ_TYPE_LEVEL_HIGH>,
- <32 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- ocram-ecc@ff8c3000 {
- compatible = "altr,socfpga-a10-ocram-ecc";
- reg = <0xff8c3000 0x90>;
- interrupts = <1 IRQ_TYPE_LEVEL_HIGH>,
- <33 IRQ_TYPE_LEVEL_HIGH> ;
- };
-
- emac0-rx-ecc@ff8c0800 {
- compatible = "altr,socfpga-eth-mac-ecc";
- reg = <0xff8c0800 0x400>;
- altr,ecc-parent = <&gmac0>;
- interrupts = <4 IRQ_TYPE_LEVEL_HIGH>,
- <36 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- emac0-tx-ecc@ff8c0c00 {
- compatible = "altr,socfpga-eth-mac-ecc";
- reg = <0xff8c0c00 0x400>;
- altr,ecc-parent = <&gmac0>;
- interrupts = <5 IRQ_TYPE_LEVEL_HIGH>,
- <37 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- nand-buf-ecc@ff8c2000 {
- compatible = "altr,socfpga-nand-ecc";
- reg = <0xff8c2000 0x400>;
- altr,ecc-parent = <&nand>;
- interrupts = <11 IRQ_TYPE_LEVEL_HIGH>,
- <43 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- nand-rd-ecc@ff8c2400 {
- compatible = "altr,socfpga-nand-ecc";
- reg = <0xff8c2400 0x400>;
- altr,ecc-parent = <&nand>;
- interrupts = <13 IRQ_TYPE_LEVEL_HIGH>,
- <45 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- nand-wr-ecc@ff8c2800 {
- compatible = "altr,socfpga-nand-ecc";
- reg = <0xff8c2800 0x400>;
- altr,ecc-parent = <&nand>;
- interrupts = <12 IRQ_TYPE_LEVEL_HIGH>,
- <44 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- dma-ecc@ff8c8000 {
- compatible = "altr,socfpga-dma-ecc";
- reg = <0xff8c8000 0x400>;
- altr,ecc-parent = <&pdma>;
- interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
- <42 IRQ_TYPE_LEVEL_HIGH>;
-
- usb0-ecc@ff8c8800 {
- compatible = "altr,socfpga-usb-ecc";
- reg = <0xff8c8800 0x400>;
- altr,ecc-parent = <&usb0>;
- interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
- <34 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- qspi-ecc@ff8c8400 {
- compatible = "altr,socfpga-qspi-ecc";
- reg = <0xff8c8400 0x400>;
- altr,ecc-parent = <&qspi>;
- interrupts = <14 IRQ_TYPE_LEVEL_HIGH>,
- <46 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- sdmmc-ecc@ff8c2c00 {
- compatible = "altr,socfpga-sdmmc-ecc";
- reg = <0xff8c2c00 0x400>;
- altr,ecc-parent = <&mmc>;
- interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
- <47 IRQ_TYPE_LEVEL_HIGH>,
- <16 IRQ_TYPE_LEVEL_HIGH>,
- <48 IRQ_TYPE_LEVEL_HIGH>;
- };
- };
-
-Stratix10 SoCFPGA ECC Manager (ARM64)
-The Stratix10 SoC ECC Manager handles the IRQs for each peripheral
-in a shared register similar to the Arria10. However, Stratix10 ECC
-requires access to registers that can only be read from Secure Monitor
-with SMC calls. Therefore the device tree is slightly different. Note
-that only 1 interrupt is sent in Stratix10 because the double bit errors
-are treated as SErrors in ARM64 instead of IRQs in ARM32.
-
-Required Properties:
-- compatible : Should be "altr,socfpga-s10-ecc-manager"
-- altr,sysgr-syscon : phandle to Stratix10 System Manager Block
- containing the ECC manager registers.
-- interrupts : Should be single bit error interrupt.
-- interrupt-controller : boolean indicator that ECC Manager is an interrupt controller
-- #interrupt-cells : must be set to 2.
-- #address-cells: must be 1
-- #size-cells: must be 1
-- ranges : standard definition, should translate from local addresses
-
-Subcomponents:
-
-SDRAM ECC
-Required Properties:
-- compatible : Should be "altr,sdram-edac-s10"
-- interrupts : Should be single bit error interrupt.
-
-On-Chip RAM ECC
-Required Properties:
-- compatible : Should be "altr,socfpga-s10-ocram-ecc"
-- reg : Address and size for ECC block registers.
-- altr,ecc-parent : phandle to parent OCRAM node.
-- interrupts : Should be single bit error interrupt.
-
-Ethernet FIFO ECC
-Required Properties:
-- compatible : Should be "altr,socfpga-s10-eth-mac-ecc"
-- reg : Address and size for ECC block registers.
-- altr,ecc-parent : phandle to parent Ethernet node.
-- interrupts : Should be single bit error interrupt.
-
-NAND FIFO ECC
-Required Properties:
-- compatible : Should be "altr,socfpga-s10-nand-ecc"
-- reg : Address and size for ECC block registers.
-- altr,ecc-parent : phandle to parent NAND node.
-- interrupts : Should be single bit error interrupt.
-
-DMA FIFO ECC
-Required Properties:
-- compatible : Should be "altr,socfpga-s10-dma-ecc"
-- reg : Address and size for ECC block registers.
-- altr,ecc-parent : phandle to parent DMA node.
-- interrupts : Should be single bit error interrupt.
-
-USB FIFO ECC
-Required Properties:
-- compatible : Should be "altr,socfpga-s10-usb-ecc"
-- reg : Address and size for ECC block registers.
-- altr,ecc-parent : phandle to parent USB node.
-- interrupts : Should be single bit error interrupt.
-
-SDMMC FIFO ECC
-Required Properties:
-- compatible : Should be "altr,socfpga-s10-sdmmc-ecc"
-- reg : Address and size for ECC block registers.
-- altr,ecc-parent : phandle to parent SD/MMC node.
-- interrupts : Should be single bit error interrupt for port A
- and then single bit error interrupt for port B.
-
-Example:
-
- eccmgr {
- compatible = "altr,socfpga-s10-ecc-manager";
- altr,sysmgr-syscon = <&sysmgr>;
- #address-cells = <1>;
- #size-cells = <1>;
- interrupts = <0 15 4>;
- interrupt-controller;
- #interrupt-cells = <2>;
- ranges;
-
- sdramedac {
- compatible = "altr,sdram-edac-s10";
- interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- ocram-ecc@ff8cc000 {
- compatible = "altr,socfpga-s10-ocram-ecc";
- reg = <ff8cc000 0x100>;
- altr,ecc-parent = <&ocram>;
- interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- emac0-rx-ecc@ff8c0000 {
- compatible = "altr,socfpga-s10-eth-mac-ecc";
- reg = <0xff8c0000 0x100>;
- altr,ecc-parent = <&gmac0>;
- interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- emac0-tx-ecc@ff8c0400 {
- compatible = "altr,socfpga-s10-eth-mac-ecc";
- reg = <0xff8c0400 0x100>;
- altr,ecc-parent = <&gmac0>;
- interrupts = <5 IRQ_TYPE_LEVEL_HIGH>'
- };
-
- nand-buf-ecc@ff8c8000 {
- compatible = "altr,socfpga-s10-nand-ecc";
- reg = <0xff8c8000 0x100>;
- altr,ecc-parent = <&nand>;
- interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- nand-rd-ecc@ff8c8400 {
- compatible = "altr,socfpga-s10-nand-ecc";
- reg = <0xff8c8400 0x100>;
- altr,ecc-parent = <&nand>;
- interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- nand-wr-ecc@ff8c8800 {
- compatible = "altr,socfpga-s10-nand-ecc";
- reg = <0xff8c8800 0x100>;
- altr,ecc-parent = <&nand>;
- interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- dma-ecc@ff8c9000 {
- compatible = "altr,socfpga-s10-dma-ecc";
- reg = <0xff8c9000 0x100>;
- altr,ecc-parent = <&pdma>;
- interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
-
- usb0-ecc@ff8c4000 {
- compatible = "altr,socfpga-s10-usb-ecc";
- reg = <0xff8c4000 0x100>;
- altr,ecc-parent = <&usb0>;
- interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- sdmmc-ecc@ff8c8c00 {
- compatible = "altr,socfpga-s10-sdmmc-ecc";
- reg = <0xff8c8c00 0x100>;
- altr,ecc-parent = <&mmc>;
- interrupts = <14 IRQ_TYPE_LEVEL_HIGH>,
- <15 IRQ_TYPE_LEVEL_HIGH>;
- };
- };
diff --git a/MAINTAINERS b/MAINTAINERS
index 7a9b8fa5f032..13c62ec3dc89 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3192,6 +3192,11 @@ M: Dinh Nguyen <dinguyen@xxxxxxxxxx>
S: Maintained
F: drivers/clk/socfpga/
+ARM/SOCFPGA EDAC BINDINGS
+M: Matthew Gerlach <matthew.gerlach@xxxxxxxxxx>
+S: Maintained
+F: Documentation/devicetree/bindings/edac/altr,socfpga-ecc-manager.yaml
+
ARM/SOCFPGA EDAC SUPPORT
M: Dinh Nguyen <dinguyen@xxxxxxxxxx>
S: Maintained
--
2.35.3