[PATCH v7 6/6] arm64: dts: qcom: ipq5018: Enable PCIe

[George Moussalem via B4 Relay]

From: Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx>

Enable the PCIe controller and PHY nodes for RDP 432-c2.

Signed-off-by: Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxxxxxxxx>
Signed-off-by: George Moussalem <george.moussalem@xxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts | 40 ++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts b/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
index 8460b538eb6a3e2d6b971bd9637309809e0c0f0c..43def95e9275258041e7522ba4098a3767be3df1 100644
--- a/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
+++ b/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
@@ -9,6 +9,8 @@
 
 #include "ipq5018.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 	model = "Qualcomm Technologies, Inc. IPQ5018/AP-RDP432.1-C2";
 	compatible = "qcom,ipq5018-rdp432-c2", "qcom,ipq5018";
@@ -28,6 +30,20 @@ &blsp1_uart1 {
 	status = "okay";
 };
 
+&pcie0 {
+	pinctrl-0 = <&pcie0_default>;
+	pinctrl-names = "default";
+
+	perst-gpios = <&tlmm 15 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 16 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&pcie0_phy {
+	status = "okay";
+};
+
 &sdhc_1 {
 	pinctrl-0 = <&sdc_default_state>;
 	pinctrl-names = "default";
@@ -43,6 +59,30 @@ &sleep_clk {
 };
 
 &tlmm {
+	pcie0_default: pcie0-default-state {
+		clkreq-n-pins {
+			pins = "gpio14";
+			function = "pcie0_clk";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio15";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+			output-low;
+		};
+
+		wake-n-pins {
+			pins = "gpio16";
+			function = "pcie0_wake";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
 	sdc_default_state: sdc-default-state {
 		clk-pins {
 			pins = "gpio9";

-- 
2.49.0