[GIT PULL] thermal drivers for v6.15-rc1

From: Daniel Lezcano
Date: Wed Mar 26 2025 - 04:44:37 EST



Hi Rafael,

please consider the following changes since commit c3b659b74541f4564f9f5a39f65e625c47e77e21:

Merge branches 'thermal-core' and 'thermal-misc' (2025-03-24 14:09:38 +0100)

are available in the Git repository at:

ssh://git@xxxxxxxxxxxxxxxxxxx/pub/scm/linux/kernel/git/thermal/linux.git tags/thermal-v6.15-rc1

for you to fetch changes up to 1b4ef46fd6660712afcfdd841eadd928193e850f:

thermal/drivers/qcom-spmi-temp-alarm: Drop unused driver data (2025-03-25 20:52:04 +0100)

----------------------------------------------------------------
- Used dev_err_probe() helpers to simplify the init code in the Qoriq
driver (Frank Li)

- Powered down the Qoriq's TMU at suspend time (Alice Guo)

- Added ipq5332, ipq5424 compatible for the QCom's tsens driver and
TSENS enable / calibration support for V2 (Praveenkumar I)

- Added missing rk3328 mapping entry (Trevor Woerner)

- Removed duplicate struct declaration in the thermal core header
(Xueqin Luo)

- Disabled the monitoring mode during suspend for the LVTS Mediatek
driver to prevent temperature acquisition glitches (Nícolas
F. R. A. Prado)

- Disabled Stage 3 thermal threshold on the LVTS Mediatek driver
because it disables the suspend ability and does have an not
interrupt handler (Nícolas F. R. A. Prado)

- Fixed low temperature offset interrupt on the LVTS Mediatek driver
to prevent multiple interrupts when the system is at its normal
functionning temperature (Nícolas F. R. A. Prado)

- Enable the interrupts on the LVTS Mediatek driver only on used
sensors (Nícolas F. R. A. Prado)

- Added the BCM74110 compatible DT binding and the corresponding code
to support the chip with a different process (Florian Fainelli)

- Corrected indentation and style in DTS example (Krzysztof Kozlowski)

- Unified hexadecimal annotatation in the rcar_gen3 driver (Niklas
Söderlund)

- Factored out the code logic to read the fuse on the on Gen3 and Gen4
drivers (Niklas Söderlund)

- Dropped unused driver data on the QCom's spmi temperature alarm
driver (Johan Hovold)

----------------------------------------------------------------
Alice Guo (1):
thermal/drivers/qoriq: Power down TMU on system suspend

Florian Fainelli (2):
dt-bindings: thermal: Update for BCM74110
thermal/drivers/brcmstb_thermal: Add support for BCM74110

Frank Li (1):
thermal/drivers/qoriq: Use dev_err_probe() simplify the code

Johan Hovold (1):
thermal/drivers/qcom-spmi-temp-alarm: Drop unused driver data

Krzysztof Kozlowski (1):
dt-bindings: thermal: Correct indentation and style in DTS example

Niklas Söderlund (2):
thermal: rcar_gen3: Use lowercase hex constants
thermal: rcar_gen3: Reuse logic to read fuses on Gen3 and Gen4

Nícolas F. R. A. Prado (5):
thermal/drivers/mediatek/lvts: Disable monitor mode during suspend
thermal/drivers/mediatek/lvts: Disable Stage 3 thermal threshold
thermal/drivers/mediatek/lvts: Disable low offset IRQ for minimum threshold
thermal/drivers/mediatek/lvts: Start sensor interrupts disabled
thermal/drivers/mediatek/lvts: Only update IRQ enable for valid sensors

Praveenkumar I (2):
dt-bindings: thermal: tsens: Add ipq5332, ipq5424 compatible
thermal/drivers/tsens: Add TSENS enable and calibration support for V2

Trevor Woerner (1):
thermal/drivers/rockchip: Add missing rk3328 mapping entry

xueqin Luo (1):
thermal: core: Remove duplicate struct declaration

.../bindings/thermal/allwinner,sun8i-a83t-ths.yaml | 48 +++---
.../devicetree/bindings/thermal/brcm,avs-tmon.yaml | 1 +
.../devicetree/bindings/thermal/imx-thermal.yaml | 40 ++---
.../bindings/thermal/imx8mm-thermal.yaml | 8 +-
.../devicetree/bindings/thermal/qcom-tsens.yaml | 18 +++
drivers/thermal/broadcom/brcmstb_thermal.c | 11 +-
drivers/thermal/mediatek/lvts_thermal.c | 103 ++++++++----
drivers/thermal/qcom/qcom-spmi-temp-alarm.c | 1 -
drivers/thermal/qcom/tsens-v2.c | 178 +++++++++++++++++++++
drivers/thermal/qcom/tsens.c | 8 +-
drivers/thermal/qcom/tsens.h | 3 +
drivers/thermal/qoriq_thermal.c | 47 +++---
drivers/thermal/renesas/rcar_gen3_thermal.c | 107 ++++++-------
drivers/thermal/rockchip_thermal.c | 1 +
include/linux/thermal.h | 2 -
15 files changed, 409 insertions(+), 167 deletions(-)


--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog