[PATCH v3 03/18] dt-bindings: clock: qcom: sm8450-camcc: Allow to specify two power domains

[Jagadeesh Kona]

From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>

To configure the camera PLLs and enable the camera GDSCs on SM8450, SM8475,
SM8550 and SM8650 platforms, the MXC rail must be ON along with MMCX.
Therefore, update the camcc bindings to include the MXC power domain on
these platforms.

Fixes: 9cbc64745fc6 ("dt-bindings: clock: qcom: Add SM8550 camera clock controller")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
Signed-off-by: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
---
 .../devicetree/bindings/clock/qcom,sm8450-camcc.yaml   | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml
index 883f12e3d11fa16384108434f6de120162226a28..927258cad89d93c7f6ce60c3fda53d094081c063 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml
@@ -35,14 +35,18 @@ properties:
       - description: Sleep clock source
 
   power-domains:
-    maxItems: 1
     description:
-      A phandle and PM domain specifier for the MMCX power domain.
+      Power domains required for the clock controller to operate
+    items:
+      - description: MMCX power domain
+      - description: MXC power domain
 
   required-opps:
-    maxItems: 1
     description:
-      A phandle to an OPP node describing required MMCX performance point.
+      Phandles to OPP nodes that describe required performance point on power domains
+    items:
+      - description: MMCX performance point
+      - description: MXC performance point
 
   reg:
     maxItems: 1
@@ -80,8 +84,10 @@ examples:
                <&rpmhcc RPMH_CXO_CLK>,
                <&rpmhcc RPMH_CXO_CLK_A>,
                <&sleep_clk>;
-      power-domains = <&rpmhpd RPMHPD_MMCX>;
-      required-opps = <&rpmhpd_opp_low_svs>;
+      power-domains = <&rpmhpd RPMHPD_MMCX>,
+                      <&rpmhpd RPMHPD_MXC>;
+      required-opps = <&rpmhpd_opp_low_svs>,
+                      <&rpmhpd_opp_low_svs>;
       #clock-cells = <1>;
       #reset-cells = <1>;
       #power-domain-cells = <1>;

-- 
2.34.1