Re: [PATCH v2] usb: dwc3: Abort suspend on soft disconnect failure
From: Kuen-Han Tsai
Date: Thu Mar 27 2025 - 09:38:49 EST
On Thu, Mar 27, 2025 at 7:01 AM Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx> wrote:
>
> On Mon, Mar 24, 2025, Kuen-Han Tsai wrote:
> > When dwc3_gadget_soft_disconnect() fails, dwc3_suspend_common() keeps
> > going with the suspend, resulting in a period where the power domain is
> > off, but the gadget driver remains connected. Within this time frame,
> > invoking vbus_event_work() will cause an error as it attempts to access
> > DWC3 registers for endpoint disabling after the power domain has been
> > completely shut down.
> >
> > Abort the suspend sequence when dwc3_gadget_suspend() cannot halt the
> > controller and proceeds with a soft connect.
> >
> > Fixes: c8540870af4c ("usb: dwc3: gadget: Improve dwc3_gadget_suspend()
>
> Keep Fixes tag in a single line. I think this issue goes further back,
> perhaps the Fixes tag better reference here?
>
> 9f8a67b65a49 ("usb: dwc3: gadget: fix gadget suspend/resume")
Fixed! I really appreciate your patience with this and the detailed code review!
Sent out the v3 patch.
https://lore.kernel.org/linux-usb/20250327133233.2566528-1-khtsai@xxxxxxxxxx/
Thanks,
Kuen-Han
>
> Thanks,
> Thinh
>
> > and dwc3_gadget_resume()")
> > CC: stable@xxxxxxxxxxxxxxx
> > Signed-off-by: Kuen-Han Tsai <khtsai@xxxxxxxxxx>
> > ---
> >
> > Kernel panic - not syncing: Asynchronous SError Interrupt
> > Workqueue: events vbus_event_work
> > Call trace:
> > dump_backtrace+0xf4/0x118
> > show_stack+0x18/0x24
> > dump_stack_lvl+0x60/0x7c
> > dump_stack+0x18/0x3c
> > panic+0x16c/0x390
> > nmi_panic+0xa4/0xa8
> > arm64_serror_panic+0x6c/0x94
> > do_serror+0xc4/0xd0
> > el1h_64_error_handler+0x34/0x48
> > el1h_64_error+0x68/0x6c
> > readl+0x4c/0x8c
> > __dwc3_gadget_ep_disable+0x48/0x230
> > dwc3_gadget_ep_disable+0x50/0xc0
> > usb_ep_disable+0x44/0xe4
> > ffs_func_eps_disable+0x64/0xc8
> > ffs_func_set_alt+0x74/0x368
> > ffs_func_disable+0x18/0x28
> > composite_disconnect+0x90/0xec
> > configfs_composite_disconnect+0x64/0x88
> > usb_gadget_disconnect_locked+0xc0/0x168
> > vbus_event_work+0x3c/0x58
> > process_one_work+0x1e4/0x43c
> > worker_thread+0x25c/0x430
> > kthread+0x104/0x1d4
> > ret_from_fork+0x10/0x20
> >
> > ---
> > Changelog:
> >
> > v2:
> > - move declarations in separate lines
> > - add the Fixes tag
> >
> > drivers/usb/dwc3/core.c | 9 +++++++--
> > drivers/usb/dwc3/gadget.c | 22 +++++++++-------------
> > 2 files changed, 16 insertions(+), 15 deletions(-)
> >
> > diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> > index 66a08b527165..1cf1996ae1fb 100644
> > --- a/drivers/usb/dwc3/core.c
> > +++ b/drivers/usb/dwc3/core.c
> > @@ -2388,6 +2388,7 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
> > {
> > u32 reg;
> > int i;
> > + int ret;
> >
> > if (!pm_runtime_suspended(dwc->dev) && !PMSG_IS_AUTO(msg)) {
> > dwc->susphy_state = (dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)) &
> > @@ -2406,7 +2407,9 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
> > case DWC3_GCTL_PRTCAP_DEVICE:
> > if (pm_runtime_suspended(dwc->dev))
> > break;
> > - dwc3_gadget_suspend(dwc);
> > + ret = dwc3_gadget_suspend(dwc);
> > + if (ret)
> > + return ret
> > synchronize_irq(dwc->irq_gadget);
> > dwc3_core_exit(dwc);
> > break;
> > @@ -2441,7 +2444,9 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
> > break;
> >
> > if (dwc->current_otg_role == DWC3_OTG_ROLE_DEVICE) {
> > - dwc3_gadget_suspend(dwc);
> > + ret = dwc3_gadget_suspend(dwc);
> > + if (ret)
> > + return ret;
> > synchronize_irq(dwc->irq_gadget);
> > }
> >
> > diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
> > index 89a4dc8ebf94..316c1589618e 100644
> > --- a/drivers/usb/dwc3/gadget.c
> > +++ b/drivers/usb/dwc3/gadget.c
> > @@ -4776,26 +4776,22 @@ int dwc3_gadget_suspend(struct dwc3 *dwc)
> > int ret;
> >
> > ret = dwc3_gadget_soft_disconnect(dwc);
> > - if (ret)
> > - goto err;
> > -
> > - spin_lock_irqsave(&dwc->lock, flags);
> > - if (dwc->gadget_driver)
> > - dwc3_disconnect_gadget(dwc);
> > - spin_unlock_irqrestore(&dwc->lock, flags);
> > -
> > - return 0;
> > -
> > -err:
> > /*
> > * Attempt to reset the controller's state. Likely no
> > * communication can be established until the host
> > * performs a port reset.
> > */
> > - if (dwc->softconnect)
> > + if (ret && dwc->softconnect) {
> > dwc3_gadget_soft_connect(dwc);
> > + return ret;
> > + }
> >
> > - return ret;
> > + spin_lock_irqsave(&dwc->lock, flags);
> > + if (dwc->gadget_driver)
> > + dwc3_disconnect_gadget(dwc);
> > + spin_unlock_irqrestore(&dwc->lock, flags);
> > +
> > + return 0;
> > }
> >
> > int dwc3_gadget_resume(struct dwc3 *dwc)
> > --
> > 2.49.0.395.g12beb8f557-goog
> >