[PATCH v2 1/2] dt-bindings: display: panel: Add Visionox G2647FB105

[Alexander Baransky]

Add a DT binding for the Visionox G2647FB105, a 6.47 inch 1080x2340
MIPI-DSI CMD mode AMOLED panel used in:
- Xiaomi Mi Note 10 / CC9 Pro (sm7150-xiaomi-tucana)
- Xiaomi Mi Note 10 Lite (sm7150-xiaomi-toco)

Xiaomi likes to use different panels in various revisions of the same
device. A factory panel even can be replaced with another model in a
service center.
So, the power configuration of this panel is similar to
some Samsung AMOLED panels, e.g. samsung,ams639rq08, which can be found on
other sm7150 Xiaomi devices. Even though Samsung panels weren't used
in sm7150-xiaomi-tucana and toco, the described voltage rails exist
(confirmed by schematics of the device).

Signed-off-by: Alexander Baransky <sanyapilot496@xxxxxxxxx>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
 .../display/panel/visionox,g2647fb105.yaml    | 79 +++++++++++++++++++
 1 file changed, 79 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/visionox,g2647fb105.yaml

diff --git a/Documentation/devicetree/bindings/display/panel/visionox,g2647fb105.yaml b/Documentation/devicetree/bindings/display/panel/visionox,g2647fb105.yaml
new file mode 100644
index 000000000000..49dcd9b8f670
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/visionox,g2647fb105.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/visionox,g2647fb105.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Visionox G2647FB105 6.47" 1080x2340 MIPI-DSI Panel
+
+maintainers:
+  - Alexander Baransky <sanyapilot496@xxxxxxxxx>
+
+description:
+  The Visionox G2647FB105 is a 6.47 inch 1080x2340 MIPI-DSI CMD mode OLED panel.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: visionox,g2647fb105
+
+  reg:
+    maxItems: 1
+
+  vdd3p3-supply:
+    description: 3.3V source voltage rail
+
+  vddio-supply:
+    description: I/O source voltage rail
+
+  vsn-supply:
+    description: Negative source voltage rail
+
+  vsp-supply:
+    description: Positive source voltage rail
+
+  reset-gpios: true
+  port: true
+
+required:
+  - compatible
+  - reg
+  - vdd3p3-supply
+  - vddio-supply
+  - vsn-supply
+  - vsp-supply
+  - reset-gpios
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "visionox,g2647fb105";
+            reg = <0>;
+
+            vdd3p3-supply = <&vreg_l7c_3p0>;
+            vddio-supply = <&vreg_l13a_1p8>;
+            vsn-supply = <&vreg_ibb>;
+            vsp-supply = <&vreg_lab>;
+
+            reset-gpios = <&pm6150l_gpios 9 GPIO_ACTIVE_LOW>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&mdss_dsi0_out>;
+                };
+            };
+        };
+    };
+
+...
-- 
2.49.0