Re: [PATCH v3 10/12] arm64: dts: imx8qm: add 24MHz clock-xtal24m
From: Laurent Pinchart
Date: Thu Mar 27 2025 - 15:02:57 EST
On Thu, Mar 27, 2025 at 08:58:14PM +0200, Laurent Pinchart wrote:
> Hi Frank,
>
> Thank you for the patch.
>
> On Mon, Feb 10, 2025 at 03:59:29PM -0500, Frank Li wrote:
> > Add fixed clock node clock-xtal24m to prepare to add camera support.
> >
> > Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
> > ---
> > change from v1 to v3
> > - none
> > ---
> > arch/arm64/boot/dts/freescale/imx8qm.dtsi | 7 +++++++
> > 1 file changed, 7 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
> > index c6a17a0d739c5..40cd45cd9f88f 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
> > @@ -590,6 +590,13 @@ mipi_pll_div2_clk: clock-controller-mipi-div2-pll {
> > clock-output-names = "mipi_pll_div2_clk";
> > };
> >
> > + xtal24m: clock-xtal24m {
> > + compatible = "fixed-clock";
> > + #clock-cells = <0>;
> > + clock-frequency = <24000000>;
> > + clock-output-names = "xtal_24MHz";
> > + };
>
> This is a clock oscillator mounted on the PCB, isn't it ? It shouldn't
> be in imx8qm.dtsi, but in board-specific DT sources.
You add fixed regulators to arch/arm64/boot/dts/freescale/imx8qm-mek.dts
and arch/arm64/boot/dts/freescale/imx8qxp-mek.dts in patch 12/12, the
additional of the fixed clock could go there too, in the same patch.
> > +
> > vpu_subsys_dsp: bus@55000000 {
> > compatible = "simple-bus";
> > #address-cells = <1>;
--
Regards,
Laurent Pinchart