[PATCH v1] ALSA: hda/tas2781: Upgrade calibratd-data writing code to support Alpha and Beta dsp firmware

[Shenghao Ding]

Since 2025, the firmware for tas2781 has been added more audio acoustic
features, such as non-linear compensation, advanced battery guard,
rattle-noise suppression, etc. The version was divided into two different
series. Both series have a slight change on the calibrated data storage
addresses, which becames flexible instead of fixed. In order to support
new firwmares in time, the code have some related upgrades.

Signed-off-by: Shenghao Ding <shenghao-ding@xxxxxx>

---
v2:
 - revise the subject and description.
v1:
 - Add updating calibration addresses code into tas2781_apply_calib in
   case of Alpha and Beta firmware.
---
 sound/pci/hda/tas2781_hda_i2c.c | 30 ++++++++++++++++++++----------
 1 file changed, 20 insertions(+), 10 deletions(-)

diff --git a/sound/pci/hda/tas2781_hda_i2c.c b/sound/pci/hda/tas2781_hda_i2c.c
index 9ed49b0dbe6b..29dc4f500580 100644
--- a/sound/pci/hda/tas2781_hda_i2c.c
+++ b/sound/pci/hda/tas2781_hda_i2c.c
@@ -558,28 +558,38 @@ static int tas2563_save_calibration(struct tasdevice_priv *tas_priv)
 
 static void tas2781_apply_calib(struct tasdevice_priv *tas_priv)
 {
-	static const unsigned char page_array[CALIB_MAX] = {
-		0x17, 0x18, 0x18, 0x13, 0x18,
+	struct calidata *cali_data = &tas_priv->cali_data;
+	struct cali_reg *r = &cali_data->cali_reg_array;
+	unsigned int cali_reg[CALIB_MAX] = {
+		TASDEVICE_REG(0, 0x17, 0x74),
+		TASDEVICE_REG(0, 0x18, 0x0c),
+		TASDEVICE_REG(0, 0x18, 0x14),
+		TASDEVICE_REG(0, 0x13, 0x70),
+		TASDEVICE_REG(0, 0x18, 0x7c),
 	};
-	static const unsigned char rgno_array[CALIB_MAX] = {
-		0x74, 0x0c, 0x14, 0x70, 0x7c,
-	};
-	int offset = 0;
 	int i, j, rc;
+	int oft = 0;
 	__be32 data;
 
+	if (tas_priv->dspbin_typ != TASDEV_BASIC) {
+		cali_reg[0] = r->r0_reg;
+		cali_reg[1] = r->invr0_reg;
+		cali_reg[2] = r->r0_low_reg;
+		cali_reg[3] = r->pow_reg;
+		cali_reg[4] = r->tlimit_reg;
+	}
+
 	for (i = 0; i < tas_priv->ndev; i++) {
 		for (j = 0; j < CALIB_MAX; j++) {
 			data = cpu_to_be32(
-				*(uint32_t *)&tas_priv->cali_data.data[offset]);
+				*(uint32_t *)&tas_priv->cali_data.data[oft]);
 			rc = tasdevice_dev_bulk_write(tas_priv, i,
-				TASDEVICE_REG(0, page_array[j], rgno_array[j]),
-				(unsigned char *)&data, 4);
+				cali_reg[j], (unsigned char *)&data, 4);
 			if (rc < 0)
 				dev_err(tas_priv->dev,
 					"chn %d calib %d bulk_wr err = %d\n",
 					i, j, rc);
-			offset += 4;
+			oft += 4;
 		}
 	}
 }
-- 
2.34.1