Re: [PATCH v6 1/2] dt-bindings: iio: light: bh1750: Add reset-gpios property

From: Jonathan Cameron
Date: Fri Mar 28 2025 - 05:49:23 EST


On Mon, 24 Mar 2025 14:59:19 +0100
Sergio Perez <sergio@xxxxxxxxxxx> wrote:

> Some BH1750 sensors require a hardware reset via GPIO before they can
> be properly detected on the I2C bus. Add a new reset-gpios property
> to the binding to support this functionality.
>
> The reset-gpios property allows specifying a GPIO that will be toggled
> during driver initialization to reset the sensor.
>
> Signed-off-by: Sergio Perez <sergio@xxxxxxxxxxx>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Series applied to the testing branch of iio.git. I'll rebase that
on rc1 once available and push out as my togreg branch.

Thanks,

Jonathan

> ---
> Revision history:
> v5 => v6:
> - Fixed include placement as commented by Krzysztof Kozlowski
> v4 => v5:
> - Update description to reflect "active low" on reset signal as indicated by Krzysztof Kozlowski
> - Update description to clarify what pin of sensor is used to do reset (DVI) as mentioned by Krzysztof Kozlowski
> - Edit example to be coherent with "active low" as informed by Krzysztof Kozlowski
> - Added necessary include on example
> v3 => v4:
> - No changes
> v2 => v3:
> - Split in two patches: dtbinding and code
> - Ensure list off mantainers following instructions by Krzysztof Kozlowski
> - Delete redundant details on description as suggested by Jonathan Cameron
> - Added related example to existing one as suggested by Jonathan Cameron
> v1 => v2:
> - Ensure check tests as commented by Rob Herring
> - Fixes some whitespaces and end lines
> ---
> Documentation/devicetree/bindings/iio/light/bh1750.yaml | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/iio/light/bh1750.yaml b/Documentation/devicetree/bindings/iio/light/bh1750.yaml
> index 1a88b3c253d5..9df81c271411 100644
> --- a/Documentation/devicetree/bindings/iio/light/bh1750.yaml
> +++ b/Documentation/devicetree/bindings/iio/light/bh1750.yaml
> @@ -24,6 +24,10 @@ properties:
> reg:
> maxItems: 1
>
> + reset-gpios:
> + description: GPIO connected to the DVI reset pin (active low)
> + maxItems: 1
> +
> required:
> - compatible
> - reg
> @@ -32,6 +36,7 @@ additionalProperties: false
>
> examples:
> - |
> + #include <dt-bindings/gpio/gpio.h>
> i2c {
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -39,6 +44,7 @@ examples:
> light-sensor@23 {
> compatible = "rohm,bh1750";
> reg = <0x23>;
> + reset-gpios = <&gpio2 17 GPIO_ACTIVE_LOW>;
> };
> };
>