Re: [PATCH v4 1/6] media: v4l2: Add NV15 and NV20 pixel formats

[Diederik de Haas]

Hi Detlev,

On Tue Mar 25, 2025 at 10:22 PM CET, Detlev Casanova wrote:
> From: Jonas Karlman <jonas@xxxxxxxxx>
>
> Add NV15 and NV20 pixel formats used by the Rockchip Video Decoder for
> 10-bit buffers.
>
> NV15 and NV20 is 10-bit 4:2:0/4:2:2 semi-planar YUV formats similar to
> NV12 and NV16, using 10-bit components with no padding between each
> component. Instead, a group of 4 luminance/chrominance samples are
> stored over 5 bytes in little endian order:
>
> YYYY = UVUV = 4 * 10 bits = 40 bits = 5 bytes
>
> The '15' and '20' suffix refers to the optimum effective bits per pixel
> which is achieved when the total number of luminance samples is a
> multiple of 8 for NV15 and 4 for NV20.
>
> Signed-off-by: Jonas Karlman <jonas@xxxxxxxxx>
> Tested-by: Nicolas Dufresne <nicolas.dufresne@xxxxxxxxxxxxx>
> Tested-by: Christopher Obbard <chris.obbard@xxxxxxxxxxxxx>
> ---
>  .../media/v4l/pixfmt-yuv-planar.rst           | 128 ++++++++++++++++++
>  drivers/media/v4l2-core/v4l2-common.c         |   2 +
>  drivers/media/v4l2-core/v4l2-ioctl.c          |   2 +
>  include/uapi/linux/videodev2.h                |   2 +
>  4 files changed, 134 insertions(+)
>
> diff --git a/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst b/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst
> index b788f69338554..22cad8c9726bf 100644
> --- a/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst
> +++ b/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst
> @@ -79,6 +79,13 @@ All components are stored with the same number of bits per component.
>        - Cr, Cb
>        - Yes
>        - Linear
> +    * - V4L2_PIX_FMT_NV15
> +      - 'NV15'
> +      - 10
> +      - 4:2:0
> +      - Cb, Cr
> +      - Yes
> +      - Linear

In your cover letter you mentioned:
Imported improvements from [1]
[1]: https://lore.kernel.org/linux-media/20250225-rkvdec_h264_high10_and_422_support-v7-2-7992a68a4910@xxxxxxxxxxxxx/

The changelog of "media: rkvdec: Add H.264 High 10 and 4:2:2 profile
support" v7 had this:
- Move V4L2_PIX_FMT_NV15/V4L2_PIX_FMT_NV20 documentation as suggested

Following a comment on v6 of that series.

But it seems these blocks are now placed at the location as it was in
the v6 series, thus NOT importing its improvements?

>      * - V4L2_PIX_FMT_NV12M
>        - 'NM12'
>        - 8
> @@ -172,6 +179,13 @@ All components are stored with the same number of bits per component.
>        - Cr, Cb
>        - Yes
>        - Linear
> +    * - V4L2_PIX_FMT_NV20
> +      - 'NV20'
> +      - 10
> +      - 4:2:2
> +      - Cb, Cr
> +      - Yes
> +      - Linear
>      * - V4L2_PIX_FMT_NV16M
>        - 'NM16'
>        - 8

The same thing seemed to have happened here?

Cheers,
  Diederik

> @@ -302,6 +316,57 @@ of the luma plane.
>        - Cr\ :sub:`11`
>  
>  
> +.. _V4L2-PIX-FMT-NV15:
> +
> +NV15
> +----
> +
> +Semi-planar 10-bit YUV 4:2:0 format similar to NV12, using 10-bit components
> +with no padding between each component. A group of 4 components are stored over
> +5 bytes in little endian order.
> +
> +.. flat-table:: Sample 4x4 NV15 Image (1 byte per cell)
> +    :header-rows:  0
> +    :stub-columns: 0

Attachment: signature.asc
Description: PGP signature