Re: [PATCH 1/2] media: dt-bindings: Add ST VD55G1 camera sensor binding
From: Benjamin Mugnier
Date: Mon Mar 31 2025 - 08:36:03 EST
Hi Krzysztof,
Thank you for your review. Consider everything done for V2.
On 3/29/25 06:42, Krzysztof Kozlowski wrote:
> On 28/03/2025 14:40, Benjamin Mugnier wrote:
>> +
>> +allOf:
>> + - $ref: /schemas/media/video-interface-devices.yaml#
>> +
>> +properties:
>> + compatible:
>> + const: st,st-vd55g1
>
> Drop st. See your filename how this should be called. Anyway, filename
> must match the compatible.
>
>> +
>> + reg:
>> + maxItems: 1
>> +
>> + clocks:
>> + maxItems: 1
>> +
>> + vcore-supply:
>> + description: Digital core power supply (1.15V)
>> +
>> + vddio-supply:
>> + description: Digital IO power supply (1.8V)
>> +
>> + vana-supply:
>> + description: Analog power supply (2.8V)
>> +
>> + reset-gpios:
>> + description: Sensor reset active low GPIO (XSHUTDOWN)
>> + maxItems: 1
>> +
>> + st,leds:
>> + description:
>> + List sensor's GPIOs used to control strobe light sources during exposure
>> + time. The numbers identify the sensor pin on which the illumination
>> + system is connected. GPIOs are active-high.
>> + $ref: /schemas/types.yaml#/definitions/uint32-array
>> + minItems: 1
>> + maxItems: 4
>> + items:
>> + minimum: 0
>> + maximum: 3
>> +
>> + port:
>> + $ref: /schemas/graph.yaml#/$defs/port-base
>> + additionalProperties: false
>> +
>> + properties:
>> + endpoint:
>> + $ref: /schemas/media/video-interfaces.yaml#
>> + unevaluatedProperties: false
>> +
>> + properties:
>> + data-lanes:
>> + description:
>> + VD55G1 only has one data lane, and must be 1.
>> + maxItems: 1
>> + items:
>> + const: 1
>
> Instead of five lines, just two:
>
> items:
> - const: 1
>
> Don't repeat constraints in free form text.
>
>
>> +
>> + link-frequencies:
>> + maxItems: 1
>> + items:
>> + minimum: 125000000
>> + maximum: 600000000
>> +
>> + lane-polarities:
>> + minItems: 1
>> + maxItems: 2
>> +
>> + required:
>> + - data-lanes
>> + - link-frequencies
>> +
>> +required:
>> + - compatible
>> + - reg
>> + - clocks
>> + - vcore-supply
>> + - vddio-supply
>> + - vana-supply
>> + - reset-gpios
>> + - port
>> +
>> +unevaluatedProperties: false
>> +
>> +examples:
>> + - |
>> + #include <dt-bindings/gpio/gpio.h>
>> +
>> + i2c {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + camera-sensor@10 {
>> + compatible = "st,vd55g1";
>
> And here another compatible...
>
>> + reg = <0x10>;
>> +
>> + clocks = <&camera_clk_12M>;
>> +
>> + vcore-supply = <&camera_vcore_v1v15>;
>> + vddio-supply = <&camera_vddio_v1v8>;
>> + vana-supply = <&camera_vana_v2v8>;
>> +
>> + reset-gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
>> + st,leds = <2>;
>> +
>> + orientation = <2>;
>> + rotation = <0>;
>> +
>> + port {
>> + endpoint {
>> + data-lanes = <1>;
>> + link-frequencies = /bits/ 64 <600000000>;
>> + remote-endpoint = <&csiphy0_ep>;
>> + };
>> + };
>> + };
>> + };
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 2286200b355bde3604607be916ef09aa88feed0e..857af27ef392b6e6865d9a545061d1b012cce07e 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -22410,6 +22410,14 @@ S: Maintained
>> F: Documentation/hwmon/stpddc60.rst
>> F: drivers/hwmon/pmbus/stpddc60.c
>>
>> +ST VD55G1 DRIVER
>> +M: Benjamin Mugnier <benjamin.mugnier@xxxxxxxxxxx>
>> +M: Sylvain Petinot <sylvain.petinot@xxxxxxxxxxx>
>> +L: linux-media@xxxxxxxxxxxxxxx
>> +S: Maintained
>> +T: git git://linuxtv.org/media.git
>
> Drop, unless you push patches there. Otherwise what is the point of
> duplicating subsystem data?
>
>> +F: Documentation/devicetree/bindings/media/i2c/st,vd55g1.yaml
>> +
>> ST VGXY61 DRIVER
>> M: Benjamin Mugnier <benjamin.mugnier@xxxxxxxxxxx>
>> M: Sylvain Petinot <sylvain.petinot@xxxxxxxxxxx>
>>
>
>
> Best regards,
> Krzysztof
--
Regards,
Benjamin