[PATCH v3 0/2] media: Add support for ST VD55G1 camera sensor

[Benjamin Mugnier]

Hi,

This serie adds support for the STMicroelectronics VD55G1 camera sensor.
The VD55G1 is a monochrome global shutter camera with a 804x704 maximum
resolution with RAW8 and RAW10 bytes per pixel.
Datasheets and other documentation can be found at st.com [1].
A lot of inspiration was taken from the imx219 and the vd56g3 serie.
It is compatible with libcamera. Tested on Raspberry Pi 4 and 5, with and
without libcamera.

[1] https://www.st.com/en/imaging-and-photonics-solutions/vd55g1.html#documentation

Regards,
Benjamin

---
Changes in v3:
- Add maxItems to data-lanes in binding
- Drop redondant 'binding' in binding commit message
- Link to v2: https://lore.kernel.org/r/20250401-b4-vd55g1-v2-0-0c8ab8a48c55@xxxxxxxxxxx

Changes in v2:
- Fix device tree binding mistakes
- Drop linux media git from MAINTAINERS file
- Fix coding style mistakes
- Drop vd55g1_err_probe wrapper
- Fix 32bits build
- Fix config symbol help paragraph being too short for checkpatch
- Link to v1: https://lore.kernel.org/r/20250328-b4-vd55g1-v1-0-8d16b4a79f29@xxxxxxxxxxx

---
Benjamin Mugnier (2):
      media: dt-bindings: Add ST VD55G1 camera sensor
      media: i2c: Add driver for ST VD55G1 camera sensor

 .../devicetree/bindings/media/i2c/st,vd55g1.yaml   |  133 ++
 MAINTAINERS                                        |    9 +
 drivers/media/i2c/Kconfig                          |   11 +
 drivers/media/i2c/Makefile                         |    1 +
 drivers/media/i2c/vd55g1.c                         | 1993 ++++++++++++++++++++
 5 files changed, 2147 insertions(+)
---
base-commit: b2c4bf0c102084e77ed1b12090d77a76469a6814
change-id: 20250225-b4-vd55g1-bdb90dbe39b3

Best regards,
-- 
Benjamin Mugnier <benjamin.mugnier@xxxxxxxxxxx>