Re: [PATCH v4 2/2] hwmon: (amc6821) Add PWM polarity configuration with OF

[Guenter Roeck]

On Wed, Apr 02, 2025 at 12:21:46PM +0200, Francesco Dolcini wrote:
> From: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>
> 
> Add support to configure the PWM-Out pin polarity based on the device
> tree. The binding would allow also to configure the PWM period, this is
> currently not implemented by the driver.
> 
> The driver has a module option to set the PWM polarity (normal=0,
> inverted=1), when specified it always takes the precedence over the DT.
> 
> Signed-off-by: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>

Applied to hwmon-next.

Thanks,
Guenter