Re: [PATCH v3 2/3] dt-bindings: iio: dac: Add adi,ad3530r.yaml

[Rob Herring (Arm)]

On Thu, 03 Apr 2025 13:33:56 +0800, Kim Seer Paller wrote:
> Document the AD3530/AD3530R (8-channel) and AD3531/AD3531R (4-channel)
> low-power, 16-bit, buffered voltage output DACs with software-
> programmable gain controls. They provide full-scale output spans of 2.5V
> or 5V for reference voltages of 2.5V. These devices operate on a single
> 2.7V to 5.5V supply and are guaranteed to be monotonic by design.
> The "R" variants include a 2.5V, 5ppm/°C internal reference, which is
> disabled by default.
> 
> Signed-off-by: Kim Seer Paller <kimseer.paller@xxxxxxxxxx>
> ---
>  .../devicetree/bindings/iio/dac/adi,ad3530r.yaml   | 99 ++++++++++++++++++++++
>  MAINTAINERS                                        |  7 ++
>  2 files changed, 106 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.example.dtb: adc@0: pwm-names: ['convst1'] is too short
	from schema $id: http://devicetree.org/schemas/iio/adc/adi,ad7606.yaml#

doc reference errors (make refcheckdocs):
Warning: Documentation/arch/powerpc/cxl.rst references a file that doesn't exist: Documentation/ABI/testing/sysfs-class-cxl
Warning: MAINTAINERS references a file that doesn't exist: Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt
Warning: lib/Kconfig.debug references a file that doesn't exist: Documentation/dev-tools/fault-injection/fault-injection.rst
Documentation/arch/powerpc/cxl.rst: Documentation/ABI/testing/sysfs-class-cxl
MAINTAINERS: Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt
lib/Kconfig.debug: Documentation/dev-tools/fault-injection/fault-injection.rst

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250403-togreg-v3-2-d4b06a4af5a9@xxxxxxxxxx

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.