Re: [PATCH 1/4] dt-bindings: backlight: kinetic,ktz8866: add ktz8866 slave compatible

[Krzysztof Kozlowski]

On 07/04/2025 11:51, Pengyu Luo wrote:
> Kinetic ktz8866, found in many android devices, nowadays, some oem use
> dual ktz8866 to support a larger panel and  higher brightness, add the

Just one space after 'and'.

> binding for slave case.
> 
> Signed-off-by: Pengyu Luo <mitltlatltl@xxxxxxxxx>
> ---
>  .../leds/backlight/kinetic,ktz8866.yaml       | 29 +++++++++++++++----
>  1 file changed, 24 insertions(+), 5 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml
> index c914e1276..825a6fbf1 100644
> --- a/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml
> +++ b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml
> @@ -19,7 +19,9 @@ allOf:
>  
>  properties:
>    compatible:
> -    const: kinetic,ktz8866
> +    enum:
> +      - kinetic,ktz8866
> +      - kinetic,ktz8866-slave

Does not look right. That's the same device. Same devices have same
compatible.

>  
>    reg:
>      maxItems: 1
> @@ -58,9 +60,16 @@ properties:
>  required:
>    - compatible
>    - reg
> -  - vddpos-supply
> -  - vddneg-supply
> -  - enable-gpios
> +
> +if:
> +  properties:
> +    compatible:
> +      const: kinetic,ktz8866
> +then:
> +  required:
> +    - vddpos-supply
> +    - vddneg-supply
> +    - enable-gpios

I don't understand why other device does not need power.

>  
>  unevaluatedProperties: false
>  
> @@ -68,7 +77,7 @@ examples:
>    - |
>      #include <dt-bindings/gpio/gpio.h>
>  
> -    i2c {
> +    i2c0 {

No, don't change.

>          #address-cells = <1>;
>          #size-cells = <0>;
>  
> @@ -84,3 +93,13 @@ examples:
>              kinetic,enable-lcd-bias;
>          };
>      };
> +
> +    i2c1 {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        backlight@11 {
> +            compatible = "kinetic,ktz8866-slave";
> +            reg = <0x11>;

No real differences here, so drop the example. Anyway, new examples
would start from - | (see other bindings).



Best regards,
Krzysztof