[PATCH v2] gpio: ds4520: don't check the 'ngpios' property in the driver

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>

This is already done by the gpio-regmap abstraction by calling
gpiochip_get_ngpios(). We don't need to do this at the driver level.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
---
Changes in v2:
- remove the ngpios variable entirely
- Link to v1: https://lore.kernel.org/r/20250407-gpio-regmap-ngpios-v1-1-5ea63fcbde39@xxxxxxxxxx
---
 drivers/gpio/gpio-ds4520.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/gpio/gpio-ds4520.c b/drivers/gpio/gpio-ds4520.c
index 1903deaef3e9..f52ecae382a4 100644
--- a/drivers/gpio/gpio-ds4520.c
+++ b/drivers/gpio/gpio-ds4520.c
@@ -25,7 +25,6 @@ static int ds4520_gpio_probe(struct i2c_client *client)
 	struct gpio_regmap_config config = { };
 	struct device *dev = &client->dev;
 	struct regmap *regmap;
-	u32 ngpio;
 	u32 base;
 	int ret;
 
@@ -33,10 +32,6 @@ static int ds4520_gpio_probe(struct i2c_client *client)
 	if (ret)
 		return dev_err_probe(dev, ret, "Missing 'reg' property.\n");
 
-	ret = device_property_read_u32(dev, "ngpios", &ngpio);
-	if (ret)
-		return dev_err_probe(dev, ret, "Missing 'ngpios' property.\n");
-
 	regmap = devm_regmap_init_i2c(client, &ds4520_regmap_config);
 	if (IS_ERR(regmap))
 		return dev_err_probe(dev, PTR_ERR(regmap),
@@ -44,7 +39,6 @@ static int ds4520_gpio_probe(struct i2c_client *client)
 
 	config.regmap = regmap;
 	config.parent = dev;
-	config.ngpio = ngpio;
 
 	config.reg_dat_base = base + DS4520_IO_STATUS0;
 	config.reg_set_base = base + DS4520_PULLUP0;

---
base-commit: 0af2f6be1b4281385b618cb86ad946eded089ac8
change-id: 20250326-gpio-regmap-ngpios-e16aae1f0c98

Best regards,
-- 
Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>