[PATCH v3 13/14] regulator: bd96801: Support ROHM BD96806 PMIC

[Matti Vaittinen]

The ROHM BD96806 is from the software perspective almost identical to
the ROHM BD96802. The main difference is different voltage tuning
ranges.

Add support differentiating these PMICs and provide correct voltages
for both models.

Signed-off-by: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
Reviewed-by: Mark Brown <broonie@xxxxxxxxxx>

---
Revision history:
v2 => v3:
 - Fix initial voltage values
 - Add a define for BD96806 voltages to help spotting mistakes in values
   filled to the respective PMIC's regulator descs
---
 drivers/regulator/bd96801-regulator.c | 69 +++++++++++++++++++++++++++
 1 file changed, 69 insertions(+)

diff --git a/drivers/regulator/bd96801-regulator.c b/drivers/regulator/bd96801-regulator.c
index 9c7109a2ab96..24d21172298b 100644
--- a/drivers/regulator/bd96801-regulator.c
+++ b/drivers/regulator/bd96801-regulator.c
@@ -182,6 +182,10 @@ static const struct linear_range bd96805_buck_init_volts[] = {
 	REGULATOR_LINEAR_RANGE(3300000 - 310000, 0xed, 0xff, 0),
 };
 
+/* BD96806 uses same voltage ranges for bucks as BD96805 */
+#define bd96806_tune_volts bd96805_tune_volts
+#define bd96806_buck_init_volts bd96805_buck_init_volts
+
 static const struct linear_range bd96801_ldo_int_volts[] = {
 	REGULATOR_LINEAR_RANGE(300000, 0x00, 0x78, 25000),
 	REGULATOR_LINEAR_RANGE(3300000, 0x79, 0xff, 0),
@@ -966,6 +970,70 @@ static const struct bd96801_pmic_data bd96805_data = {
 	.num_regulators = 7,
 };
 
+static const struct bd96801_pmic_data bd96806_data = {
+	.regulator_data = {
+	{
+		.desc = {
+			.name = "buck1",
+			.of_match = of_match_ptr("buck1"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD96801_BUCK1,
+			.ops = &bd96801_buck_ops,
+			.type = REGULATOR_VOLTAGE,
+			.linear_ranges = bd96806_tune_volts,
+			.n_linear_ranges = ARRAY_SIZE(bd96806_tune_volts),
+			.n_voltages = BD96805_BUCK_VOLTS,
+			.enable_reg = BD96801_REG_ENABLE,
+			.enable_mask = BD96801_BUCK1_EN_MASK,
+			.enable_is_inverted = true,
+			.vsel_reg = BD96801_BUCK1_VSEL_REG,
+			.vsel_mask = BD96805_BUCK_VSEL_MASK,
+			.ramp_reg = BD96801_BUCK1_VSEL_REG,
+			.ramp_mask = BD96801_MASK_RAMP_DELAY,
+			.ramp_delay_table = &buck_ramp_table[0],
+			.n_ramp_values = ARRAY_SIZE(buck_ramp_table),
+			.owner = THIS_MODULE,
+		},
+		.init_ranges = bd96806_buck_init_volts,
+		.num_ranges = ARRAY_SIZE(bd96806_buck_init_volts),
+		.irq_desc = {
+			.irqinfo = (struct bd96801_irqinfo *)&buck1_irqinfo[0],
+			.num_irqs = ARRAY_SIZE(buck1_irqinfo),
+		},
+	},
+	{
+		.desc = {
+			.name = "buck2",
+			.of_match = of_match_ptr("buck2"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD96801_BUCK2,
+			.ops = &bd96801_buck_ops,
+			.type = REGULATOR_VOLTAGE,
+			.linear_ranges = bd96806_tune_volts,
+			.n_linear_ranges = ARRAY_SIZE(bd96806_tune_volts),
+			.n_voltages = BD96805_BUCK_VOLTS,
+			.enable_reg = BD96801_REG_ENABLE,
+			.enable_mask = BD96801_BUCK2_EN_MASK,
+			.enable_is_inverted = true,
+			.vsel_reg = BD96801_BUCK2_VSEL_REG,
+			.vsel_mask = BD96805_BUCK_VSEL_MASK,
+			.ramp_reg = BD96801_BUCK2_VSEL_REG,
+			.ramp_mask = BD96801_MASK_RAMP_DELAY,
+			.ramp_delay_table = &buck_ramp_table[0],
+			.n_ramp_values = ARRAY_SIZE(buck_ramp_table),
+			.owner = THIS_MODULE,
+		},
+		.irq_desc = {
+			.irqinfo = (struct bd96801_irqinfo *)&buck2_irqinfo[0],
+			.num_irqs = ARRAY_SIZE(buck2_irqinfo),
+		},
+		.init_ranges = bd96806_buck_init_volts,
+		.num_ranges = ARRAY_SIZE(bd96806_buck_init_volts),
+	},
+	},
+	.num_regulators = 2,
+};
+
 static int initialize_pmic_data(struct platform_device *pdev,
 				struct bd96801_pmic_data *pdata)
 {
@@ -1264,6 +1332,7 @@ static const struct platform_device_id bd96801_pmic_id[] = {
 	{ "bd96801-regulator", (kernel_ulong_t)&bd96801_data },
 	{ "bd96802-regulator", (kernel_ulong_t)&bd96802_data },
 	{ "bd96805-regulator", (kernel_ulong_t)&bd96805_data },
+	{ "bd96806-regulator", (kernel_ulong_t)&bd96806_data },
 	{ },
 };
 MODULE_DEVICE_TABLE(platform, bd96801_pmic_id);
-- 
2.49.0

Attachment: signature.asc
Description: PGP signature