Re: [PATCH v3 2/3] drm/st7571-i2c: add support for Sitronix ST7571 LCD controller

[Marcus Folkesson]

Hi,

On Tue, Apr 08, 2025 at 03:57:22PM +0200, Thomas Zimmermann wrote:
> Hi
> 
> Am 08.04.25 um 15:20 schrieb Marcus Folkesson:
> [...]
> > > 
> > > > +static int st7571_set_pixel_format(struct st7571_device *st7571,
> > > > +				   u32 pixel_format)
> > > > +{
> > > > +	switch (pixel_format) {
> > > > +	case DRM_FORMAT_C1:
> > > > +		return st7571_set_color_mode(st7571, ST7571_COLOR_MODE_BLACKWHITE);
> > > > +	case DRM_FORMAT_C2:
> > > > +		return st7571_set_color_mode(st7571, ST7571_COLOR_MODE_GRAY);
> > > > +	default:
> > > > +		return -EINVAL;
> > > > +	}
> > > These should be DRM_FORMAT_R1 and DRM_FORMAT_R2 and not C{1,2}. The former
> > > is for displays have a single color (i.e: grey) while the latter is when a
> > > pixel can have different color, whose values are defined by a CLUT table.
> > > 
> > I see.
> > Does fbdev only works with CLUT formats? I get this error when I switch
> > to DRM_FORMAT_R{1,2}:
> > 
> > [drm] Initialized st7571 1.0.0 for 0-003f on minor 0
> > st7571 0-003f: [drm] format C1   little-endian (0x20203143) not supported
> > st7571 0-003f: [drm] No compatible format found
> > st7571 0-003f: [drm] *ERROR* fbdev: Failed to setup emulation (ret=-22)
> 
> For testing purposes, you can add the _R formats to the switch case at
> 
> https://elixir.bootlin.com/linux/v6.13.7/source/drivers/gpu/drm/drm_fb_helper.c#L1246
> 
> and see how it goes.

Still no penguin (same error as above).

The problem is that drm_mode_legacy_fb_format(), which is called from
drm_fbdev_shmem_driver_fbdev_probe -> drm_driver_legacy_fb_format -> drm_mode_legacy_fb_format

Sets the pixel format DRM_FORMAT_C{1,2} when bpp is 1 or 2.
So I don't think it is possible to use the _R formats with fbdev.
But I'm not sure?

> 
> Best regards
> Thomas

Best regards,
Marcus Folkesson

Attachment: signature.asc
Description: PGP signature