Re: [PATCH v2 2/2] arm64: dts: ti: Add k3-am62-pocketbeagle2

[Dhruva Gole]

On Apr 08, 2025 at 18:18:23 -0500, Robert Nelson wrote:
> BeagleBoard.org PocketBeagle 2 is an upgraded version of the popular
> PocketBeagle.  It is based on Texas Instruments AM6232 or AM6254 SoC.
> Its dual or quad A53 cores can provide higher performance than classic
> PocketBeagle. The new design comes with pre-soldered headers, a 3-pin
> JST-SH 1.00mm UART debug port, a USB-C port, Texas Instruments
> MSPM0L1105 Cortex-M0+ MCU for ADC, 512MB RAM, and a LiPo Battery charger.
> 
> https://www.beagleboard.org/boards/pocketbeagle-2
> https://openbeagle.org/pocketbeagle/pocketbeagle-2
> 
> Signed-off-by: Robert Nelson <robertcnelson@xxxxxxxxx>
> CC: Rob Herring <robh@xxxxxxxxxx>
> CC: Krzysztof Kozlowski <krzk+dt@xxxxxxxxxx>
> CC: Conor Dooley <conor+dt@xxxxxxxxxx>
> CC: Vignesh Raghavendra <vigneshr@xxxxxx>
> CC: Nishanth Menon <nm@xxxxxx>
> CC: Andrew Davis <afd@xxxxxx>
> CC: Roger Quadros <rogerq@xxxxxxxxxx>
> CC: Siddharth Vadapalli <s-vadapalli@xxxxxx>
> CC: Judith Mendez <jm@xxxxxx>
> CC: Andrei Aldea <a-aldea@xxxxxx>
> CC: Dhruva Gole <d-gole@xxxxxx>
> CC: Jason Kridner <jkridner@xxxxxxxxxxxxxxx>
> CC: Deepak Khatri <lorforlinux@xxxxxxxxxxxxxxx>
> CC: Ayush Singh <ayush@xxxxxxxxxxxxxxx>
> ---
> Changes since v1:
>  - fix '_' in main-i2c2-default-pins
>  - aliases i2c match original pocketbeagle
>  - add mcu_m4fss with reseved memory and mailbox
>  - drop unused main_gpio0_pins_default pinmux
>  - drop unused main_gpio1_pins_default pinmux
>  - drop unused main_spi2_pins_gpio pinmux
>  - Reserve 128MiB of global CMA

Thanks for addressing comments from last revision,

Reviewed-by: Dhruva Gole <d-gole@xxxxxx>


-- 
Best regards,
Dhruva Gole
Texas Instruments Incorporated