Re: [PATCH v6 06/11] arm64: dts: ti: k3-am62a7-sk: Enable IPC with remote processors
From: Devarsh Thakkar
Date: Thu Apr 10 2025 - 05:04:04 EST
Hi Andrew, Judith,
Thanks for the quick revert.
On 07/04/25 21:28, Andrew Davis wrote:
On 4/7/25 9:13 AM, Judith Mendez wrote:
Hi Devarsh,
On 4/7/25 8:54 AM, Devarsh Thakkar wrote:
Hi Judith,
On 05/04/25 05:45, Judith Mendez wrote:
> From: Devarsh Thakkar <devarsht@xxxxxx>
Thanks for the patch.
For each remote proc, reserve memory for IPC and bind the mailbox
assignments. Two memory regions are reserved for each remote processor.
The first region of 1MB of memory is used for Vring shared buffers
and the second region is used as external memory to the remote
processor
for the resource table and for tracebuffer allocations.
Signed-off-by: Devarsh Thakkar <devarsht@xxxxxx>
Signed-off-by: Hari Nagalla <hnagalla@xxxxxx>
Signed-off-by: Judith Mendez <jm@xxxxxx>
---
arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 96 +++++++++++++++++++++
++--
1 file changed, 90 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/
boot/dts/ti/k3-am62a7-sk.dts
index 1c9d95696c839..7d817b447c1d0 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
@@ -52,6 +52,42 @@ linux,cma {
linux,cma-default;
};
+ c7x_0_dma_memory_region: c7x-dma-memory@99800000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x99800000 0x00 0x100000>;
+ no-map;
+ };
+
+ c7x_0_memory_region: c7x-memory@99900000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x99900000 0x00 0xf00000>;
+ no-map;
+ };
+
+ mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@9b800000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9b800000 0x00 0x100000>;
+ no-map;
+ };
+
+ mcu_r5fss0_core0_memory_region: r5f-dma-memory@9b900000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9b900000 0x00 0xf00000>;
+ no-map;
+ };
+
+ wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9c800000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9c800000 0x00 0x100000>;
+ no-map;
+ };
+
+ wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9c900000 0x00 0xf00000>;
+ no-map;
+ };
+
secure_tfa_ddr: tfa@9e780000 {
reg = <0x00 0x9e780000 0x00 0x80000>;
alignment = <0x1000>;
@@ -63,12 +99,6 @@ secure_ddr: optee@9e800000 {
alignment = <0x1000>;
no-map;
};
-
- wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0x9c900000 0x00 0x01e00000>;
- no-map;
- };
};
This is missing the edgeAI specific remote-core carveouts and RTOS-
to-RTOS IPC memory regions [1] being used by edgeAI firmwares which
come as pre-packaged in the official SDK release for AM62A.
There is only one official SDK release for AM62A (which is edgeAI
based) [2] which packages these edgeAI remoteproc firmwares and in my
view it is a fair expectation that remote core careveouts in device-
tree should align with firmwares released in SDK.
Why should Linux upstream care about what we do in our current evil
vendor SDKs?
These carveouts are specific to remote-cores and so have to match with
firmwares running in these remote-cores. The debate is on which
firmwares it should match to. The firmwares being packaged in SDK are
the most used-ones and so in my view it is safe to account them as the
official ones, unless of-course there is a major overhaul and
re-architecture planned and accepted for these firmwares in which case
we should wait for it.
We change things around every cycle, and do all kinds of hacky things to
just
"make it work" for the current SDK release.
I don't see any changes done in memory map for last set of releases, but
agreed if there is big architecture change planned for these firmwares
then we should rather wait for updated firmwares then adding bloated
carve-outs.
This is because most developers (including me) and vendors download
this official SDK release and use it with latest upstream kernel and
modules (right now we are applying required patches locally) and this
patch won't suffice for this, in-fact it won't work since the
remoteproc firmwares are already using regions beyond the reserved-
regions from this patch.
Then that firmware team should fix their firmware, Linux should not
do things just because some builds of a firmware did the wrong thing.
Maybe some optimizations would be missing, but carve-outs for lot of
things which these firm-wares do out-of-box (and not even related fully
to AI) are missing. For e.g. there is RTOS-to-RTOS IPC test which runs
on startup and there is no reserved region for same, this would lead to
tricky failures. The DM R5 remote core also controls ISP, but all
required regions for same are also not present either.
Just a random example from the top of my mind here, a while back
someone on the codec firmware team decided to take the standard RPMSG
name service structure and modify it to suit some specific usecase
they had, suddenly all the firmware we made for AM57x devices stopped
working on upstream kernels. Instead of fixing the firmware we just
carried a hack for the same in our vendor kernel trees. Now customers
have no path to use this old firmware on newer kernels as adding the
hack to upstream Linux (rightly) failed [0].
Let's not do that again, if we have firmware that doesn't follow
upstream, then let's fix the firmware, not hack around it upstream.
The edgeAI firmware folks have no issue ignoring existing upstream
IPC carveouts and simply replacing them all with their own custom
ones in their SDK[1], I see no reason they cannot continue doing that
if they don't want to fix their firmware.
There is no apples-to-apples comparison with TDA4VM, unlike AM62A7 it
offers SDK for both edgeAI and generic Linux [1], so if someone just
uses latest upstream kernel and device-tree with this generic linux SDK,
that would still work without any overlays applied or carveouts added.
Same is not true for AM62A, as AM62A offers only edgeAI SDK with
firmwares packaged for AI use-cases. So if someone, just replaces latest
upstream kernel and device-tree with the patches from this series in
edgeAI wic image, it won't work cleanly due to missing carve-outs.
Also even if we keep aside edgeAI, basic camera+ISP use-case won't work
without the carveouts and we would prefer not to clone another layer to
grab the overlay and apply it every-time we want to test run camera+ISP
(and even the edgeAI use-case) on AM62A which would be a pain.
I understand your point, currently with this patch remoteproc loading
will not work for some cores. However, the goal here is to standardize
as much as possible the memory carveout sizes, push the "demo firmware"
to request resources the correct way from resource table, and move away
from this dependency and limitations that we have with our firmware.
I understand this, but my view is that w.r.t firmware only goal should
not just be tp demonstrate correct way of requesting resources from
resource-tables, optimize the carve-outs etc but also to demonstrate the
primary use-cases (camera+ISP+edgeAI) which the device is capable of.
should soon be able to generate our own firmware using Zephyr, which
Andrew is pioneering, so with this firmware we should move to the
correct direction upstream. Downstream we are still using the memory
carveout sizes that the firmware folk want so desperately to keep, for
now..
+1
I have this Zephyr based firmware for AM62A working and it uses the
standard IPC regions as specified in this patch. I'll be posting the PR
for it in Zephyr upstream by the end of week.
I understand this, but will this zephyr based firmware support vision +
edgeAI analytics ? Does it demonstrate all the unique capabilities of
AM62A SoC ? If not, then what would be utility of such firmware on AM62A
where these are the primary use-cases w.r.t AM62A ?
Why should upstream device-tree use carve-outs which match to this demo
zephyr based firmware (which apparently not many are using and is not
going into any official SDK release) instead of official firmwares going
into SDK ? SDK released firmwares are being used by so many customers
and SDK documentation maps to it, but zephyr firmware that is being
pitched here, who would be the potential users and what would be it's
utility ?
[1]: https://www.ti.com/tool/PROCESSOR-SDK-J721E
Regards
Devarsh
For this patch as it is:
Acked-by: Andrew Davis <afd@xxxxxx>
Andrew
[0] https://lore.kernel.org/lkml/20241011123922.23135-1-richard@xxxxxx/
[1] https://git.ti.com/cgit/edgeai/meta-edgeai/tree/recipes-kernel/
linux/linux-ti-staging/j721e-evm/0001-arm64-dts-ti-Add-DTB-overlays-for-
vision-apps-and-ed.patch?h=kirkstone
~ Judith
[1]: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/tree/
arch/arm64/boot/dts/ti/k3-am62a7-sk.dts?h=ti-linux-6.6.y-cicd#n103
[2]: https://www.ti.com/tool/PROCESSOR-SDK-AM62A
Regards
Devarsh
opp-table {
@@ -741,3 +771,57 @@ dpi1_out: endpoint {
};
};
};
+
+&mailbox0_cluster0 {
+ status = "okay";
+
+ mbox_r5_0: mbox-r5-0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+};
+
+&mailbox0_cluster1 {
+ status = "okay";
+
+ mbox_c7x_0: mbox-c7x-0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+};
+
+&mailbox0_cluster2 {
+ status = "okay";
+
+ mbox_mcu_r5_0: mbox-mcu-r5-0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+};
+
+&wkup_r5fss0 {
+ status = "okay";
+};
+
+&wkup_r5fss0_core0 {
+ mboxes = <&mailbox0_cluster0>, <&mbox_r5_0>;
+ memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
+ <&wkup_r5fss0_core0_memory_region>;
+};
+
+&mcu_r5fss0 {
+ status = "okay";
+};
+
+&mcu_r5fss0_core0 {
+ mboxes = <&mailbox0_cluster2>, <&mbox_mcu_r5_0>;
+ memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+ <&mcu_r5fss0_core0_memory_region>;
+};
+
+&c7x_0 {
+ mboxes = <&mailbox0_cluster1>, <&mbox_c7x_0>;
+ memory-region = <&c7x_0_dma_memory_region>,
+ <&c7x_0_memory_region>;
+ status = "okay";
+};