[PATCH 2/5] arm64: dts: qcom: x1e80100-hp-x14: remove PS8830 retimer 1 definitions

[Jens Glathe via B4 Relay]

From: Jens Glathe <jens.glathe@xxxxxxxxxxxxxxxxxxxxxx>

Clean-up of regulators, i2c definition, pinctrl

Signed-off-by: Jens Glathe <jens.glathe@xxxxxxxxxxxxxxxxxxxxxx>
---
 .../boot/dts/qcom/x1e80100-hp-omnibook-x14.dts     | 134 ---------------------
 1 file changed, 134 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts
index 27f6b21589704b1767d45763773da4cf9c43c77b..582d4326d5d527d20f99e716349ea0e9c0d35099 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts
@@ -370,54 +370,6 @@ vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
 		regulator-boot-on;
 	};
 
-	vreg_rtmr1_1p15: regulator-rtmr1-1p15 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "VREG_RTMR1_1P15";
-		regulator-min-microvolt = <1150000>;
-		regulator-max-microvolt = <1150000>;
-
-		gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-0 = <&usb1_pwr_1p15_reg_en>;
-		pinctrl-names = "default";
-
-		regulator-boot-on;
-	};
-
-	vreg_rtmr1_1p8: regulator-rtmr1-1p8 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "VREG_RTMR1_1P8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-
-		gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-0 = <&usb1_pwr_1p8_reg_en>;
-		pinctrl-names = "default";
-
-		regulator-boot-on;
-	};
-
-	vreg_rtmr1_3p3: regulator-rtmr1-3p3 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "VREG_RTMR1_3P3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-0 = <&usb1_pwr_3p3_reg_en>;
-		pinctrl-names = "default";
-
-		regulator-boot-on;
-	};
-
 	vreg_vph_pwr: regulator-vph-pwr {
 		compatible = "regulator-fixed";
 
@@ -1046,64 +998,6 @@ eusb3_repeater: redriver@47 {
 	};
 };
 
-&i2c7 {
-	clock-frequency = <400000>;
-
-	status = "okay";
-
-	typec-mux@8 {
-		compatible = "parade,ps8830";
-		reg = <0x8>;
-
-		clocks = <&rpmhcc RPMH_RF_CLK4>;
-
-		vdd-supply = <&vreg_rtmr1_1p15>;
-		vdd33-supply = <&vreg_rtmr1_3p3>;
-		vdd33-cap-supply = <&vreg_rtmr1_3p3>;
-		vddar-supply = <&vreg_rtmr1_1p15>;
-		vddat-supply = <&vreg_rtmr1_1p15>;
-		vddio-supply = <&vreg_rtmr1_1p8>;
-
-		reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>;
-
-		pinctrl-0 = <&rtmr1_default>;
-		pinctrl-names = "default";
-
-		orientation-switch;
-		retimer-switch;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				retimer_ss1_ss_out: endpoint {
-					remote-endpoint = <&pmic_glink_ss1_ss_in>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				retimer_ss1_ss_in: endpoint {
-					remote-endpoint = <&usb_1_ss1_qmpphy_out>;
-				};
-			};
-
-			port@2 {
-				reg = <2>;
-
-				retimer_ss1_con_sbu_out: endpoint {
-					remote-endpoint = <&pmic_glink_ss1_con_sbu_in>;
-				};
-			};
-
-		};
-	};
-};
-
 &i2c8 {
 	clock-frequency = <400000>;
 
@@ -1536,13 +1430,6 @@ wake-n-pins {
 		};
 	};
 
-	rtmr1_default: rtmr1-reset-n-active-state {
-		pins = "gpio176";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
 	tpad_default: tpad-default-state {
 		pins = "gpio3";
 		function = "gpio";
@@ -1564,27 +1451,6 @@ reset-n-pins {
 		};
 	};
 
-	usb1_pwr_1p15_reg_en: usb1-pwr-1p15-reg-en-state {
-		pins = "gpio188";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	usb1_pwr_1p8_reg_en: usb1-pwr-1p8-reg-en-state {
-		pins = "gpio175";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	usb1_pwr_3p3_reg_en: usb1-pwr-3p3-reg-en-state {
-		pins = "gpio186";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
 	usb_1_ss1_sbu_default: usb-1-ss1-sbu-state {
 		mode-pins {
 			pins = "gpio177";

-- 
2.48.1