[PATCH net-next v6 04/12] net: usb: lan78xx: move LED DT configuration to helper

[Oleksij Rempel]

Extract the LED enable logic based on the "microchip,led-modes"
property into a new helper function lan78xx_configure_leds_from_dt().

This simplifies lan78xx_phy_init() and improves modularity.
No functional changes intended.

Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
---
changes v6:
- this patch is added in v6
---
 drivers/net/usb/lan78xx.c | 72 +++++++++++++++++++++++++--------------
 1 file changed, 46 insertions(+), 26 deletions(-)

diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index a54d246244b8..6965013ebc59 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -2649,6 +2649,49 @@ static int lan78xx_mac_prepare_for_phy(struct lan78xx_net *dev)
 	return 0;
 }
 
+/**
+ * lan78xx_configure_leds_from_dt() - Configure LED enables based on DT
+ * @dev: LAN78xx device
+ * @phydev: PHY device (must be valid)
+ *
+ * Reads "microchip,led-modes" property from the PHY's DT node and enables
+ * the corresponding number of LEDs by writing to HW_CFG.
+ *
+ * This helper preserves the original logic, enabling up to 4 LEDs.
+ * If the property is not present, this function does nothing.
+ *
+ * Return: 0 on success or a negative error code.
+ */
+static int lan78xx_configure_leds_from_dt(struct lan78xx_net *dev,
+					  struct phy_device *phydev)
+{
+	struct device_node *np = phydev->mdio.dev.of_node;
+	u32 reg;
+	int len, ret;
+
+	if (!np)
+		return 0;
+
+	len = of_property_count_elems_of_size(np, "microchip,led-modes",
+					      sizeof(u32));
+	if (len < 0)
+		return 0;
+
+	ret = lan78xx_read_reg(dev, HW_CFG, &reg);
+	if (ret < 0)
+		return ret;
+
+	reg &= ~(HW_CFG_LED0_EN_ | HW_CFG_LED1_EN_ |
+		 HW_CFG_LED2_EN_ | HW_CFG_LED3_EN_);
+
+	reg |= (len > 0) * HW_CFG_LED0_EN_ |
+	       (len > 1) * HW_CFG_LED1_EN_ |
+	       (len > 2) * HW_CFG_LED2_EN_ |
+	       (len > 3) * HW_CFG_LED3_EN_;
+
+	return lan78xx_write_reg(dev, HW_CFG, reg);
+}
+
 static int lan78xx_phy_init(struct lan78xx_net *dev)
 {
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(fc) = { 0, };
@@ -2704,32 +2747,9 @@ static int lan78xx_phy_init(struct lan78xx_net *dev)
 
 	phy_support_eee(phydev);
 
-	if (phydev->mdio.dev.of_node) {
-		u32 reg;
-		int len;
-
-		len = of_property_count_elems_of_size(phydev->mdio.dev.of_node,
-						      "microchip,led-modes",
-						      sizeof(u32));
-		if (len >= 0) {
-			/* Ensure the appropriate LEDs are enabled */
-			ret = lan78xx_read_reg(dev, HW_CFG, &reg);
-			if (ret < 0)
-				return ret;
-
-			reg &= ~(HW_CFG_LED0_EN_ |
-				 HW_CFG_LED1_EN_ |
-				 HW_CFG_LED2_EN_ |
-				 HW_CFG_LED3_EN_);
-			reg |= (len > 0) * HW_CFG_LED0_EN_ |
-				(len > 1) * HW_CFG_LED1_EN_ |
-				(len > 2) * HW_CFG_LED2_EN_ |
-				(len > 3) * HW_CFG_LED3_EN_;
-			ret = lan78xx_write_reg(dev, HW_CFG, reg);
-			if (ret < 0)
-				return ret;
-		}
-	}
+	ret = lan78xx_configure_leds_from_dt(dev, phydev);
+	if (ret)
+		goto free_phy;
 
 	genphy_config_aneg(phydev);
 
-- 
2.39.5