Re: [BUG] ixgbe: Detected Tx Unit Hang (XDP)

[Marcus Wichelmann]

Am 10.04.25 um 16:30 schrieb Michal Kubiak:
> On Wed, Apr 09, 2025 at 05:17:49PM +0200, Marcus Wichelmann wrote:
>> Hi,
>>
>> in a setup where I use native XDP to redirect packets to a bonding interface
>> that's backed by two ixgbe slaves, I noticed that the ixgbe driver constantly
>> resets the NIC with the following kernel output:
>>
>>   ixgbe 0000:01:00.1 ixgbe-x520-2: Detected Tx Unit Hang (XDP)
>>     Tx Queue             <4>
>>     TDH, TDT             <17e>, <17e>
>>     next_to_use          <181>
>>     next_to_clean        <17e>
>>   tx_buffer_info[next_to_clean]
>>     time_stamp           <0>
>>     jiffies              <10025c380>
>>   ixgbe 0000:01:00.1 ixgbe-x520-2: tx hang 19 detected on queue 4, resetting adapter
>>   ixgbe 0000:01:00.1 ixgbe-x520-2: initiating reset due to tx timeout
>>   ixgbe 0000:01:00.1 ixgbe-x520-2: Reset adapter
>>
>> This only occurs in combination with a bonding interface and XDP, so I don't
>> know if this is an issue with ixgbe or the bonding driver.
>> I first discovered this with Linux 6.8.0-57, but kernel 6.14.0 and 6.15.0-rc1
>> show the same issue.
>>
>>
>> I managed to reproduce this bug in a lab environment. Here are some details
>> about my setup and the steps to reproduce the bug:
>>
>> [...]
>>
>> Do you have any ideas what may be causing this issue or what I can do to
>> diagnose this further?
>>
>> Please let me know when I should provide any more information.
>>
>>
>> Thanks!
>> Marcus
>>
> 
> Hi Marcus,

Hi Michal,

thank you for looking into it. And not even 24 hours after my report, I'm
very impressed! ;)

> I have just successfully reproduced the problem on our lab machine. What
> is interesting is that I do not seem to have to use a bonding interface
> to get the "Tx timeout" that causes the adapter to reset.

Interesting. I just tried again but had no luck yet with reproducing it
without a bonding interface. May I ask how your setup looks like?

> I will try to debug the problem more closely and let you know of any
> updates.
> 
> Thanks,
> Michal

Great!

Marcus